···
Log in / Register

how much is a 1901 o silver dollar worth

1Answers
StCharles
12/01/2025, 03:10:48 AM

That's a great question! The value of a 1901-O Morgan silver dollar depends almost entirely on its condition, also known as its grade. A heavily worn coin that was used in circulation is worth much less than a pristine coin that looks like it just left the New Orleans Mint.

Based on the information, a 1901-O silver dollar in circulated condition can be worth anywhere from about $32 for a well-worn coin in "Good" condition to around $50 for a coin in "About Uncirculated" condition. These are the coins that you can clearly see have been handled and used as money.

The value starts to climb significantly for uncirculated coins, often called "Mint State" (MS). An average uncirculated 1901-O might be valued between $70 and $130. However, for coins in higher uncirculated grades, the price jumps dramatically. For instance, in a choice uncirculated grade like MS-65, the coin could be worth over $500.

For exceptionally well-preserved examples that have very few blemishes, the value can soar into the thousands. The absolute highest-grade specimens are extremely rare and can be worth tens of thousands of dollars to serious collectors. To know for sure what your specific coin is worth, you would need to have it professionally graded.

Was this review help?
115
Share
More Q&A

How do I connect my kreafunk aGROOVE plus speaker to my device using Bluetooth?

Pairing your kreafunk aGROOVE plus Bluetooth speaker with your phone, tablet, or other Bluetooth-enabled device is straightforward. Here's how to do it: Power On your kreafunk aGROOVE plus: Press and hold the power button until the LED indicator starts flashing, signaling pairing mode. Enable Bluetooth on your device: Go to the Bluetooth settings on your smartphone, tablet, or another device and turn Bluetooth on. Scan for devices: Your device will search for available Bluetooth devices. Look for "kreafunk aGROOVE plus" in the list of available devices. Pairing process: Select "kreafunk aGROOVE plus" from the list to initiate the connection. You'll likely hear a confirmation sound from the speaker once connected. Connection confirmation: The LED indicator on the speaker will become solid, indicating a successful connection. Start playing music: You can now play audio from your device, which will stream wirelessly to your kreafunk aGROOVE plus speaker. Remember that the Bluetooth range is up to 10 meters, so keep your device within that range for the best performance. If you have any trouble, check the user manual or contact the retailer.
119
Share

When should I refill my IMMERGAS 3.023316 Magis Hercules ERP Polyphosphate Dispenser Kit with Cillit-55 M-H Universal?

To know when to refill your IMMERGAS 3.023316 Magis Hercules ERP Polyphosphate Dispenser Kit with Cillit-55 M-H Universal, check the transparent cup on the dispenser. The instruction manual advises that when the cup is empty, it's time to refill. Keep a regular eye on the cup and refill it with Cillit-55 M-H Universal promptly when needed. This ensures optimal performance and protection against limescale and corrosion. Using only Cillit-55 M-H Universal is crucial for maintaining your dispenser's functionality and preventing system damage.
111
Share

How do I program the remote for my Wind River WR2009MB ceiling fan?

To program the remote for your Wind River WR2009MB 48-inch 3-blade smart LED ceiling fan, follow these steps: First, cut power to the ceiling fan at the circuit breaker. Locate the frequency settings on both the remote control transmitter and the receiver unit (usually located within the fan housing) and adjust them using a small tool, ensuring they match. Restore power to the fan. Within one minute of restoring power, press and hold the "FAN OFF" button on the remote for approximately 10 seconds to initiate the learning function; avoid pressing any other buttons during this step. The fan blades should rotate briefly, and the light (if equipped) should blink twice, confirming successful frequency matching. If the fan still doesn't respond, repeat the process. Always consult your Wind River WR2009MB ceiling fan manual for troubleshooting or contact Wind River customer support for assistance.
116
Share

How to Clean Your TRiSTAR RA-2727 Raclette After Use?

Maintaining your TRiSTAR RA-2727 Raclette in top condition is easy with proper cleaning. Always unplug the raclette and allow it to cool completely before cleaning. Here's a detailed guide: Grill Plate and Raclette Pans: Remove the grill plate and raclette pans. Wash them in warm, soapy water using a soft sponge or cloth. For stubborn food residue, soak them briefly. Rinse thoroughly and ensure they are completely dry before the next use. Appliance Surfaces: Wipe the appliance surfaces with a soft cloth dampened with water. For tougher stains, use a soft cloth with warm, soapy water. Dry the appliance thoroughly with a soft, dry cloth to prevent water damage. General Cleaning Tips: Avoid using solvents, harsh chemicals, abrasive cleaning agents, wire brushes, sharp objects, or scouring pads. Only use mild liquid dish detergent. Ensure all parts are completely dry before storing your TRiSTAR RA-2727 Raclette. Store the appliance in a cool, dry place, out of the reach of children. Following these steps will help you keep your TRiSTAR RA-2727 Raclette in great shape for many delicious meals.
114
Share

What is the battery life of the GearLight NOVASAT-0412-1853-4 Waterproof LED Spotlight?

The GearLight NOVASAT-0412-1853-4 Waterproof LED Spotlight offers extended illumination on a single set of batteries, making it a great choice for camping and outdoor activities. The duration the batteries last varies depending on the brightness setting selected and the quality of the AA batteries used. To maximize performance, using high-quality AA batteries is recommended. Planning a longer trip? It's always a good idea to bring extra batteries to ensure you have light when you need it.
113
Share

How do I install the Siemens CC-5/CC-2 System Cardcage?

Installing the Siemens CC-5/CC-2 System Cardcage involves a few key steps to ensure proper function. Here's a guide to help you: First, before you begin, remember that the card guides are shipped separately. Install these after you've completed any field wiring. Make sure the upper and lower card guides are correctly keyed, and secure them with the provided screws. Also, always disconnect all system power before starting the installation. Next, consider the mounting. The CC-5 and CC-2 cardcages are designed to mount at the back of your enclosure, either directly onto studs or using the optional Mounting Plate (CAB-MP). Choose the mounting position that best suits your setup, considering the available slots and the location of adjacent modules. If using the Mounting Plate, attach the cardcage with screws, ensuring it's flush on all sides. Wiring is the next critical aspect. Connect your external wiring to the removable terminal blocks located at the top and bottom of the CC-5/CC-2. Simply insert the wires and tighten the locking mechanisms. For data transfer, use the 60-pin male connectors labeled P1 and P2 on the cardcage motherboard to connect the Data Bus. If you need to connect to a PSC-12/PSX-12 in a different row, use the 60-pin bus cable. Lastly, for the CAN Bus connection, use the six-pin connector (P3), located above P1 on the cardcage motherboard. Some specifications to keep in mind: The CC-5 has dimensions of 10.58 inches wide by 14.25 inches high, while the CC-2 is 4.78 inches wide and 14.25 inches high. Also, be sure to check the power supply loading calculations for the P1 and P2 connectors to ensure optimal performance of your Siemens system.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.