Installing the Siemens CC-5/CC-2 System Cardcage involves a few key steps to ensure proper function. Here's a guide to help you: First, before you begin, remember that the card guides are shipped separately. Install these after you've completed any field wiring. Make sure the upper and lower card guides are correctly keyed, and secure them with the provided screws. Also, always disconnect all system power before starting the installation. Next, consider the mounting. The CC-5 and CC-2 cardcages are designed to mount at the back of your enclosure, either directly onto studs or using the optional Mounting Plate (CAB-MP). Choose the mounting position that best suits your setup, considering the available slots and the location of adjacent modules. If using the Mounting Plate, attach the cardcage with screws, ensuring it's flush on all sides. Wiring is the next critical aspect. Connect your external wiring to the removable terminal blocks located at the top and bottom of the CC-5/CC-2. Simply insert the wires and tighten the locking mechanisms. For data transfer, use the 60-pin male connectors labeled P1 and P2 on the cardcage motherboard to connect the Data Bus. If you need to connect to a PSC-12/PSX-12 in a different row, use the 60-pin bus cable. Lastly, for the CAN Bus connection, use the six-pin connector (P3), located above P1 on the cardcage motherboard. Some specifications to keep in mind: The CC-5 has dimensions of 10.58 inches wide by 14.25 inches high, while the CC-2 is 4.78 inches wide and 14.25 inches high. Also, be sure to check the power supply loading calculations for the P1 and P2 connectors to ensure optimal performance of your Siemens system.
