···
Log in / Register

how much is a 1886 o morgan silver dollar worth

1Answers
MasonLee
12/01/2025, 02:52:01 AM

Hello there! That's a great question about a classic American coin. The value of an 1886-O Morgan Silver Dollar can vary quite a bit, and it all comes down to its condition, or "grade."

Based on the information, a circulated 1886-O Morgan dollar is quite common. In lower grades, like "Good" or "Fine," you can expect it to be worth somewhere in the range of $35 to $40. As the condition improves to "Extremely Fine" or "About Uncirculated," the value might increase to around $45.

The real jump in price happens with uncirculated coins, often called "Mint State" or MS. These are coins that were never used as money and have retained their original shine. An 1886-O in a lower uncirculated grade like MS-60 might be worth around $63, while a nicer MS-63 could fetch between $100 and $130.

This particular coin becomes much scarcer and more valuable in higher grades. For an MS-65 example, the value can jump significantly, potentially reaching between $400 and $600. The 1886-O is known for often having a weak strike, so a sharply detailed, high-grade coin is especially prized by collectors.

In short, the condition is everything. A worn, circulated coin has a modest value, but a pristine, uncirculated one can be worth hundreds of dollars.

Was this review help?
114
Share
More Q&A

How do I properly clean and maintain my ECG ICM 1253 Ice Maker?

Keeping your ECG ICM 1253 Ice Maker clean is crucial for both its efficiency and the quality of your ice. Follow these steps for optimal cleaning and maintenance: First, prioritize safety: always switch the ice maker off and unplug it from the power supply before beginning any cleaning tasks. Next, drain any residual water by removing the ice cubes, moving the ice maker to a sink, and removing the drain plug located at the front bottom to allow water to drain completely. Then, remove the ice basket and wash it with warm water and a gentle detergent. For the ice maker's interior, use a diluted detergent solution and a soft cloth to wipe down the surfaces; avoid harsh or abrasive cleaners. The exterior should be cleaned regularly with a mild detergent and warm water, avoiding chemicals, solvents, or oils. Before plugging the ice maker back in, ensure the interior is completely dry. Finally, securely replace the drain plug. Consistent cleaning and maintenance will prevent buildup, ensuring your ECG ICM 1253 ice maker performs reliably and provides clean ice. Always consult your user manual for specific instructions or any model-specific precautions.
117
Share

Need help disassembling my Nissan Sentra dashboard for the MeTra 99-7414 dash kit installation

To successfully install the MeTra 99-7414 dash kit in your Nissan Sentra, carefully follow these steps for dashboard disassembly and kit assembly. Dashboard Disassembly: Begin by opening the storage compartment above the radio and gently pulling on the lip to remove the compartment and AC vent assembly. Next, unclip and remove the trim panel located around the pocket beneath the climate control. Now, unscrew the four screws securing the radio, climate control, and pocket assembly—two are located on top, and two on the bottom—then unplug and remove the entire assembly. Remove the two screws holding the climate control trim panel to the factory brackets. Then, remove the four screws that secure the radio to the factory brackets. Detach the radio and climate control trim panel from the pocket/climate control assembly. Finally, unsnap and remove the climate control trim panel from the radio. Kit Assembly: Start by removing the metal DIN sleeve and trim ring from your aftermarket radio. Slide the radio between the factory pocket/climate control assembly, which you removed earlier, and secure the radio using the screws provided with the radio. Snap the factory climate control trim panel and the radio trim panel together. Place the assembled unit onto the front of the radio, climate control, and pocket assembly, and fasten the two assemblies together with the screws removed during disassembly. Locate the factory wiring harness and antenna connector within the dash and make all necessary connections to the radio and climate controls. Reconnect the negative battery terminal and verify that the radio functions correctly. Finally, reassemble the dash, reversing the disassembly steps. If you encounter any challenges, contact the Tech Support line for assistance. Ensure you have the necessary tools ready and carefully review the instructions during installation.
110
Share

How do I install the OPERA CLARO CCL086B1 Ceiling Unit Extractor Hood correctly

Installing your OPERA CLARO CCL086B1 Ceiling Unit Extractor Hood? Here's a step-by-step guide to ensure a safe and proper installation: Safety First: Always have installation, connection, and repairs handled by qualified technicians. Wear gloves to protect yourself from sharp edges. Electrical Setup: Double-check that your mains voltage matches the specifications on the hood's type plate. Plug the hood into a properly grounded safety socket. For a fixed connection, get a qualified electrician to handle the wiring. Ducting the Exhaust Air: Make sure the kitchen air doesn't vent into a chimney or flue used for other fuel-burning appliances. Follow local regulations for exhaust air ducting. If you're using the hood with other appliances that use room air, ensure sufficient air supply. Hob Clearance: Maintain a minimum distance of 650mm between the hood and gas cookers, keeping in mind the maximum heat output of your stove or hob. Mounting Procedure: Determine which way the hood will face during installation. Mark the center point on your ceiling and drill four holes for mounting. Hang the hood using hanger bolts, securing it firmly. Attach the exhaust air hose, making sure it's free of kinks. Connect the power and test the hood's functions. Disposal: Recycle packaging materials responsibly, following local environmental regulations. Following these guidelines will help you successfully and safely install your OPERA CLARO CCL086B1 Ceiling Unit Extractor Hood.
112
Share

How do I safely assemble the Ashley Lindalon Coffee Table with a glass top to avoid injury

When assembling the Ashley T914-1 Living Room Lindalon Coffee Table, safety is paramount, especially when handling the glass top. To ensure a smooth and injury-free assembly, follow these crucial guidelines: Handle with Extreme Care: Always treat the glass top with the utmost care. Avoid any unnecessary force or pressure that could lead to breakage or injury. Assemble with Assistance: Given the size and potential weight of the glass, it is highly recommended to have a second person assist you. This is essential for safely positioning and attaching the glass top. Use Appropriate Tools: Have all the necessary tools readily available before you start. Refer to the instruction manual to identify any specific tools recommended for handling the glass top, and use them to ensure a secure assembly. Follow Assembly Instructions Precisely: Adhere strictly to the assembly steps outlined in the Ashley Lindalon Coffee Table manual, completing them in the correct sequence. Deviating from the instructions or skipping steps can increase the risk of accidents or damage. Address Electrical Safety: If the assembly includes any electrical components, such as lamps or lights, disconnect the power supply by unplugging the cords before you begin. This helps prevent electrical hazards. By following these safety tips, you can confidently and safely assemble your Ashley Lindalon Coffee Table, ensuring both your safety and the longevity of your new furniture.
112
Share

How do I pair my NUTRI FIT IF1090D Smart Scale with the MovingLife App?

Connecting your NUTRI FIT IF1090D Digital Smart Scale to the MovingLife App is easy! Follow these steps: Make sure Bluetooth is turned on in your mobile device's settings. Open the MovingLife App on your phone or tablet. If you don't have an account, create one. If you do, log in. Go to your profile settings within the app. Look for an option like "Add Device" or "Connect Scale" and tap it. The app will start searching for nearby devices. When the NUTRI FIT IF1090D appears in the list, select it. The app will likely prompt you to step onto the scale barefoot to start the connection process. The scale should then sync with the app via Bluetooth. Your body composition data from the scale will be sent to the MovingLife App, where you can view and track your progress. Please note that the exact wording in the app might vary slightly depending on the app version. Refer to the instruction manual that came with your NUTRI FIT IF1090D for more specific troubleshooting or additional assistance.
101
Share

How do I install the S&S Cycle 55mm Performance Manifold Kit on my motorcycle?

Installing the S&S Cycle 55mm Performance Manifold Kit can significantly enhance your motorcycle's performance. Here's a step-by-step guide to help you with the installation process, ensuring optimal results: Remove Existing Components: Begin by removing the stock throttle body and intake manifold. Refer to your motorcycle's factory service manual for precise instructions. Also, remove the fuel rail, fuel injectors, MAP sensor, manifold flanges, and associated seals. Keep these components aside, as they will be re-used. Prepare the Manifold: Clean the manifold mounting surfaces on the cylinder heads meticulously. This is crucial for a secure seal. Position the manifold flanges on the manifold, ensuring the flat side faces the manifold and the beveled side faces the cylinder head. Install the new manifold o-ring seals with the beveled side toward the flange and the flat side facing outwards. Install the Manifold Assembly: Mount the manifold onto your motorcycle, but do not tighten the bolts completely at this stage. Install the fuel rail and fuel injectors into the manifold. Apply blue thread locker to the fuel rail bolts, and tighten them to 100 in-lbs. Secure the MAP sensor into the manifold using blue thread locker on the threads, and tighten to 20 in-lbs. Final Installation Steps: Thread the bolts through the manifold flanges and into the cylinder heads. Tighten them snugly, but leave them slightly loose initially. Insert the supplied o-ring into the manifold. Attach the throttle body to the manifold. Install your air cleaner assembly according to the manufacturer's specific instructions. Finally, tighten the manifold bolts completely. Apply the CARB EO number label to the frame down tube, either above or below the factory label. Important Considerations: Always adhere to the installation instructions and utilize the hardware provided with the S&S Cycle kit. It is always recommended that you consult your motorcycle's service manual for the most accurate and up-to-date procedures. Always comply with all applicable federal, state, and local laws and regulations during the installation. Following these steps will help ensure a successful installation of the S&S Cycle 55mm Performance Manifold Kit, maximizing your motorcycle's performance.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.