Installing the Kichler 37531 Zagara 3-Light Vanity requires careful attention to detail. Here's a step-by-step guide to help you:
-
Mounting Bracket Installation:
- Position the mounting bracket (B) so that the raised center part extends into the electrical outlet box.
- Secure the mounting bracket (B) to the outlet box using short machine screws (BB) and long machine screws (DD).
-
Wiring Connections:
- Ground Wire: Wrap the ground wire from your electrical outlet box around the ground screw on the mounting bracket (B) and tighten the screw firmly.
- Supply Wires: Connect the white (neutral) supply wire to the white (neutral) fixture wire and the black (hot) supply wire to the black (hot) fixture wire. Ensure these connections are secure.
-
Fixture Assembly:
- Screw the threaded rods (F) into the exposed threaded pipe (G). Repeat this for any remaining rods.
- Place the canopy (A) over the long machine screws (DD) and secure it using lock washers (EE) and threaded knobs (CC).
- Slide the shades (E) over the sockets (D) and secure them with socket rings (C) using the provided wrench (FF).
-
Bulb Installation:
- Insert three bulbs into the sockets. Use bulbs with a maximum of 60 watts each, and they must be either medium-base incandescent or LED/CFL equivalents.
-
Final Steps:
- Confirm that the fixture can be installed with the sockets pointing either up or down, based on your preference.
- Be careful not to overtighten the socket rings when you are securing the shades.
For additional details and safety information, always consult the Kichler 37531 Zagara 3-Light Vanity instruction manual. If you have any problems, don't hesitate to reach out to Kichler customer service for help.
