···
Log in / Register

How do I update the password on my Refasy Electronic Coin Money Bank?

1Answers
LucilleFitz
12/17/2025, 05:32:00 AM

To set a new password on your Refasy Electronic Coin Money Bank, follow these straightforward steps: First, enter the existing default password, which is 0000. Next, press and hold the '' button until you see the red light begin to flash, signaling that the door is unlocked. Now, input your preferred new 4-digit code and then press the '#' button. The red light will stop flashing, confirming that your new password has been successfully saved. Finally, release the '' button. Your Refasy Electronic Coin Money Bank is now secured with your new password.

Was this review help?
103
Share
More Q&A

How do I connect my device to the OSD NERO-STREAM-WRA Outdoor Amplifier via Bluetooth?

To wirelessly connect your smartphone or tablet to the OSD NERO-STREAM-WRA Outdoor Amplifier using Bluetooth, follow these straightforward steps: First, on the amplifier, press the Source Select button until the Bluetooth indicator light starts to flash. This indicates the amplifier is ready to pair. Next, on your phone or tablet, enable Bluetooth in your device's settings. Then, initiate a search for available Bluetooth devices; the OSD NERO-STREAM-WRA should appear in the list. Select the OSD NERO-STREAM-WRA from the list on your device to begin pairing. Once successfully paired, your device will likely display a confirmation, and the Bluetooth indicator on the amplifier will remain solid. You can now wirelessly stream your audio from your phone or tablet through the OSD NERO-STREAM-WRA Outdoor Amplifier. To remove a previously paired device, press and hold the Connect/Reset button on the amplifier for two seconds. For additional details or troubleshooting guidance, please consult the OSD NERO-STREAM-WRA Outdoor Amplifier's user manual.
103
Share

How do I oil my Taylor Pneumatic T-7700SS Scissor Shear?

To properly oil your Taylor Pneumatic Tool Company T-7700SS Scissor Shear, follow these easy steps: After each use, introduce 1/2 teaspoon of air tool oil into the air inlet of the tool. Next, activate the tool for about one second to ensure the oil thoroughly coats all internal components. Regularly oiling your T-7700SS Scissor Shear after each use will help maintain its peak performance and extend its operational life. For additional support, consult the product's instruction manual or reach out to Taylor Pneumatic Tool Company directly. You can contact them at: Taylor Pneumatic Tool Company 505 N. Railroad Ave. Boynton Beach, Florida 33435, or P.O. Box 1117 Boynton Beach, Florida 33425. You can also call (561) 732-1111, fax (561) 731-4412, or use their toll-free number 800-805-8665. For more information, visit their website at www.taylorpneumatic.com.
107
Share

How do I connect my Polk Audio LSiM 705 tower speakers to my amplifier?

Connecting your Polk Audio LSiM 705 tower speakers to your amplifier or receiver is straightforward. Follow these steps for a secure and optimal connection: Prepare the Speaker Wire: Strip about 1/2 inch (12.7mm) of insulation from both ends of your speaker wire. Twist the exposed wire strands to keep them neat and prevent fraying. Identify Terminals: Locate the positive (+) and negative (-) terminals on both the back of your Polk Audio LSiM 705 speaker and your amplifier or receiver. The positive terminals are usually marked in red, and the negative terminals are usually marked in black. Connect to the Speaker: Unscrew the binding post caps on the back of the Polk Audio LSiM 705 speaker. Insert the bare wire end into the hole near the base of the corresponding positive or negative terminal, matching polarity (positive to positive, negative to negative). Tighten the binding post cap firmly, but avoid over-tightening. Connect to the Amplifier/Receiver: Repeat step 3 for the other end of the speaker wire, connecting it to the corresponding positive and negative terminals on your amplifier or receiver. Secure the Connections: Ensure all wire connections are secure, with no loose strands. Double-check that the positive (+) terminal on the speaker is connected to the positive (+) terminal on the amplifier/receiver, and the negative (-) terminal on the speaker is connected to the negative (-) terminal on the amplifier/receiver. Power On: Once all connections are verified, power on your amplifier or receiver and enjoy your Polk Audio LSiM 705 speakers! Note: If you prefer using connectors like banana plugs or spade lugs, refer to the Polk Audio LSiM 705 speaker manual for specific instructions on connecting those to the binding posts.
118
Share

How do I set the cooking time and power level on my Panasonic NN-SD372S microwave oven

Setting the cooking time and power level on your Panasonic NN-SD372S Stainless Steel Microwave Oven is straightforward. Here's how: First, press the "Time Cook" button. Then, use the number keypad to input your desired cooking time. For instance, to cook for 2 minutes and 30 seconds, enter "2-3-0". Next, press the "Power Level" button. You can then use the number keypad to select your power level, ranging from 1 to 10, where 10 is the highest. If you want a power level of 5, enter "5". Finally, press the "Start" button to begin cooking with your specified time and power settings. For detailed visual instructions and guidance on specific cooking needs, please consult the full instruction manual that came with your Panasonic microwave.
115
Share

How do I properly clean my DOMO DO476K filter coffee machine?

Keeping your DOMO DO476K filter coffee machine clean ensures optimal performance and extends its lifespan. Here’s how to clean it: First, always unplug the appliance and allow it to cool down. After each use, wash the carafe, carafe lid, filter holder, and permanent filter with warm, soapy water. Use a soft, damp cloth to wipe the exterior, removing any stains. Also, wipe off any water droplets after use. Clean the keep-warm plate with a damp cloth; avoid abrasive cleaners. For decalcifying, which should be done every 3 to 4 weeks, fill the carafe with a mixture of 1/4 vinegar and 3/4 cold water. Pour this mixture into the water tank and run the coffee maker without coffee until the liquid runs clear. Repeat this process if needed, and then run the coffee maker at least twice with just water to remove any lingering vinegar smell. For comprehensive details, always consult the DOMO DO476K instruction manual.
108
Share

How do I set the temperature and timer on my Elite Gourmet ETO-4510M Slice Convection Oven?

Setting the temperature and cooking time on your Elite Gourmet ETO-4510M Slice Convection Oven is straightforward. Here's how: Preparation : Ensure the oven is plugged in and placed on a stable, heat-resistant surface. Power On : Open the oven door and locate the digital control panel. Press the "Power" button to turn the oven on. Set Temperature : Use the arrow buttons or the dial (if your model has one) to select your desired temperature. The temperature range typically spans from 150 to 450 degrees Fahrenheit. Confirm your selection by pressing "Start" or "Enter". Set Cooking Time : Use the arrow buttons or dial to set the cooking time. Time is usually adjustable in minutes and hours. Then, press "Start" or "Enter". Cooking Process : The oven will start to preheat. Once it reaches the set temperature, the timer will begin counting down. Completion : When the timer reaches zero, the oven usually beeps and shuts off automatically. You can also turn off the oven manually using the "Power" button. For more detailed instructions and illustrations specific to your Elite Gourmet ETO-4510M model, always refer to the user manual that came with your oven.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.