Programming your Somfy SITUO 5 io/RTS remote control involves a few straightforward steps, depending on the type of device you're controlling. Here's a guide:
-
Programming a Somfy Remote-Controlled Lamp Holder or Socket:
- Ensure the lamp holder or socket is powered on, and consider disconnecting other Somfy devices temporarily.
- Use the channel selection button on the SITUO 5 io/RTS remote to choose the desired channel.
- Press the programming button on the lamp holder or socket until its indicator light flashes.
- Press the PROG button located on the back of your SITUO 5 io/RTS remote control.
- The indicator light on the lamp holder/socket will stay on, then turn off, confirming successful programming.
-
Adding a Remote Control Using an Existing Programmed Remote:
- On the remote already controlling your Somfy devices, select the channel associated with the products you want to add to your new remote.
- Press the PROG button on the existing remote until the indicator lights on your devices flash.
- On your new SITUO 5 io/RTS remote, select the channel you wish to program.
- Press the PROG button on the new remote. The indicator lights on your devices will turn on, then off, indicating programming completion.
-
Programming a Somfy Roller Shutter or Hinged Shutter Drive:
- Slightly open the shutter using its original control.
- Press the PROG button on the original control until the shutter moves up and down.
- Use the channel selection button on the SITUO 5 io/RTS remote to select the correct channel.
- Press the PROG button on the back of your SITUO 5 io/RTS remote. The shutter should move up and down, confirming the programming.
Always consult the specific instructions that came with your Somfy devices and refer to the user manual for detailed guidance and troubleshooting tips to ensure a smooth setup.
