Taking a grease sample with the OELCHECK grease sampling kit is straightforward. Here’s a step-by-step guide to help you obtain an accurate sample for analysis: First, prepare the sampling area. Clean the area around the sampling point using the provided cleaning cloth to eliminate any external contaminants. Next, you have two primary methods for sampling: Using the Syringe: Attach the tube to the syringe cone and insert it into the lubrication hole. Draw the necessary amount of grease into the plastic tube, being careful not to introduce too much air. Bend the tube in the middle and place it in the OELCHECK sample bottle with the bend facing upwards. Using a Spatula: If the syringe isn't suitable, use one of the provided spatulas. Mix the grease with the spatula to get a representative sample and then transfer it to the sample bottle. Specific Equipment Procedures: For rolling bearings, draw grease from the cage area or between the rolling elements using the tube or spatula. For large rolling bearings, take the grease from sampling openings, ideally from the main load-carrying areas, and mix the samples for the most accurate analysis. Finally, prepare for shipment. Fill out the sample data online or use the Grease Sample Information Form. Attach the barcode to the sample bottle, and place the bottle along with the Sample Information Form into the leak-proof envelope. Then, send the envelope to OELCHECK for analysis. Following these steps ensures you obtain reliable grease samples when using the OELCHECK grease sampling kit.
