How to Wire a HINKLEY 1668 Luna Outdoor Wall Light with a 0-10V LED Dimmer?

[HavenRose]

To properly wire your HINKLEY 1668 Luna Outdoor Wall Light with a 0-10 volt LED dimmer, follow these straightforward steps. First, you'll need to identify the wires. For 120/277 voltage, the junction box will have four wires: Black, White, Gray, and Purple if using the optional 0-10 volt dimmer. Next, connect the wires, matching the colors from the junction box to the fixture as follows: Black (B) from the junction box connects to Black (B) on the fixture, White (W) from the junction box connects to White (W) on the fixture, Gray/Pink (G) from the junction box connects to Gray/Pink (G) on the fixture, and Purple (P) from the junction box connects to Purple (P) on the fixture. Remember to connect the ground wire from the fixture to the ground on the mounting hardware. If using an incandescent dimmer instead, refer to the dimmer's manufacturer instructions. When using an incandescent dimmer, cap off the Gray and Purple wires inside the fixture's canopy to avoid shorts and potential fixture failure. This wiring setup ensures your HINKLEY 1668 Luna Outdoor Wall Light works seamlessly with a 0-10 volt LED dimmer, giving you full control over the light's brightness.