How do I wire the CWI LIGHTING 5035C24C Brianna 12 Light Flush Mount?

[RyanLee]

Wiring your CWI LIGHTING 5035C24C Brianna 12 Light Flush Mount requires careful attention to detail. Always turn off the electricity at the circuit breaker or main fuse box before beginning. Here's how to wire it safely:

1. Separate the Mounting Bracket: Detach the mounting bracket from the ceiling canopy.
2. Affix the Mounting Bracket to the Outlet Box: Run the supply wires through the mounting bracket. Secure the bracket to the outlet box with the green ground screw facing you, using the outlet box screws. Tighten until snug.
3. Make the Wire Connections: Use standard wire connectors to join all wire connections securely. Twist the connectors until the wires are tightly joined. Wrap each connection with approved electrical tape.
4. Position Wires: Carefully place all connected wires into the outlet box.
5. Install the Ceiling Canopy: Proceed to install the ceiling canopy to the ceiling.
6. Final Steps: Install the crystals and bulbs as indicated in the instructions.

If you're uncertain about any step, consult a licensed electrician for assistance to ensure a safe and proper installation.