How do I set up and power on my Datavideo PD-4A Redundant Power Center?

[Willis]

Setting up and powering on your Datavideo PD-4A Redundant Power Center is straightforward. Here's how:

1. Connecting the Power Source:

   • For AC power, plug the AC power cord into the AC inlet on the front panel. Ensure the front panel power switch is set to "On".
   • For DC power, connect a 12V power source to the DC Input terminal on the front panel.

2. Powering On:

   • If using AC, check that the AC Input LED on the front panel is green.
   • If using DC, check that the DC Input LED on the front panel is green.
   • Press the Buzzer ON/OFF button to enable or disable the buzzer.

3. Connecting Your Devices:

   • The PD-4A provides DC output terminals. On the rear panel, you'll find DC output sockets labeled DC Out 12V 5A and DC Out 12V 10A.
   • Connect your devices to the appropriate DC output terminals based on their power needs.

4. Power Indicators and Protection:

   • Each DC output has an LED indicator showing its status.
   • The PD-4A includes auto-recovery fuse protection for each output.

5. Additional Features:

   • The PD-4A has a sequential power-on feature.
   • It also incorporates cooling fans to prevent overheating.

Following these steps will help you connect and power on your Datavideo PD-4A, ensuring your devices receive power safely and efficiently. For detailed guidance, consult the Datavideo PD-4A product manual or Datavideo support.