How do I safely and correctly install my Roll Hill MODL5 Modo Ceiling Mount?

[LeGeorge]

Installing your Roll Hill MODL5 Modo Ceiling Mount requires careful attention to safety and the following steps:

Safety First:

• Use only one light bulb per socket.
• This ceiling mount is designed for direct installation on non-combustible surfaces only.
• Avoid mounting the Modo Chandeliers on surfaces that are easily flammable.
• The fixture is intended for dry, indoor locations.
• Ensure the ambient temperature does not exceed 25˚C.

Installation Steps:

1. Consult a licensed electrician for all installation work.
2. Use light bulbs that do not exceed 25 watts.
3. Attach the crossbar (A) to the junction box using the provided screws (B).
4. Thread the 1/8 IPS (C) into the center hole of the crossbar and feed electrical wires through it.
5. Place the backplate (D) over the threaded pipe and secure it by threading the mounting bracket (E) onto the pipe. Ensure the canopy sits flush against the surface.
6. Make the necessary electrical connections to the sconce. Trim any excess wire and carefully push the connected wires into the half hub.
7. Fit the hub over the mounting bracket and secure it using the provided screws (F) and the Allen key.

Attaching the Globes:

1. Position the glass globe (A) around the socket fitter (B) and cap (C).
2. Gently tighten the sleeve (D) to secure the globe in place.

Important Safety Reminders:

• This fixture is designed for dry, indoor use only.
• The maximum ambient temperature should not exceed 25˚C.
• If the external flexible cable or cord is damaged, it must be replaced by Roll & Hill or a qualified professional to prevent hazards.
• The light source in this luminaire should only be replaced by the manufacturer or a qualified professional.

By following these instructions carefully, you can safely install your Roll Hill MODL5 Modo Ceiling Mount and enjoy its beautiful design.