How do I replace a faulty LED in my GE Holiday 24LEDI-7MMb-900 LED string lights?

[Jocelyn]

To replace a non-functioning LED in your GE Holiday 24LEDI-7MMb-900 7mm LED string lights, follow these steps: First, unplug the light set from the power outlet, always grasping the plug itself. Next, gently pull the LED lamp and its plastic base straight out of the lamp holder. Replace the burned-out LED with a replacement lamp of the correct specifications: a 3.3 Volt, 0.066 Watt, LED type, as provided with your GE Holiday lights. If the new lamp's base doesn't fit, remove the base from the old, burned-out lamp by carefully straightening the leads and pulling the lamp out. Then, thread the leads of the new lamp through the holes in the old base, ensuring one lead goes into each hole. Once the lamp is fully inserted, bend each lead upwards, similar to the other lamps in the set, so that they make contact with the internal contacts in the lamp holder. Important: Only use the specified 3.3 Volt, 0.066 Watt replacement lamps included with the GE Holiday product to prevent fire hazards. These light sets do not use lamp shunts, and using incorrect lamps could cause problems. If you have any difficulties, consult the user manual or contact GE customer service for further assistance.