Pairing a Wireless Universal Voltage Dimming Switchpack with a Wireless Area Controller (WAC) in your WaveLinx Pro system is straightforward. Here's a step-by-step guide:
- Power Up and Initial State: When you power up the Relay Switchpack, it will initially be ON (closed). The 0-10V output will be set to 75% light output.
- Initiate Pairing: Press and release the commissioning button on the Relay Switchpack. This action toggles the Relay state.
- LED Indication: The LED on the Relay Switchpack provides status feedback. If the Relay is closed, the LED will be ON.
- Wireless Network Join: The Relay Switchpack will join the WaveLinx Pro wireless network. Upon joining, the Relay will turn OFF for a 5-minute period. This allows you to visually identify which fixtures have successfully joined the network, as they will turn off for this duration.
- Identify Unpaired Fixtures: Observe which fixtures do not turn OFF during the 5-minute hold period. These fixtures did not receive the join beacon from the WAC and will remain at 75% or full brightness.
- Pairing Completion: Once the pairing process and the 5-minute OFF period are complete, all relays become part of the default area and dimmable zone.
- Further Configuration: For more advanced settings and to complete your setup, consult the WaveLinx Pro Mobile App manual. This will guide you through the remaining configuration steps.
If you have any difficulties during the pairing process, the manual's troubleshooting section or contacting Technical Services is available to help.
