Installing the Blink BC3 Home Wall Mounted Charging Station involves several key steps to ensure a safe and effective setup. Before you begin, always prioritize safety. This guide provides a detailed walkthrough, but remember, electrical work should ideally be performed by a qualified electrician.
Here’s a step-by-step guide:
- Safety First: Before you do anything, check for any shipping damages to the unit. Confirm that the power supply voltage and current rating match the specifications on the charging station's rating label. This is crucial for safe operation.
- Grounding: Ground the charge point using a permanent wiring system. Use a wire with a dedicated grounding wire and a ring terminal. Connect this to the equipment ground terminal block.
- Mounting the Charging Station: Secure the main body mounting bracket to your wall using appropriate screws. Ensure the wall is made of wood, masonry, or concrete strong enough to support the station's weight. Follow the recommended height guidelines for both indoor and outdoor installations.
- Electrical Wiring: Connect the input wires to the terminal block. Refer to the wiring instructions for the correct wiring and torque specifications.
- Install the Holster: Fasten the holster hook to the wall using screws. Combine the holster with the hook, ensuring screws are fully tightened. Finally, place your EV charging plug on the holster.
Tools and Parts You'll Need:
- Mounting Bracket
- Holster Assembly
- Screw Bag
- Copper Wire
- Heat Shrink Tube
- Terminal
- Conduit (if required by local codes)
- Torx Screwdriver
- Phillips Screwdriver
- Hexagon Socket
- Torque Wrench
Important Safety Precautions:
- Disconnect power at the circuit breaker before starting any installation work.
- Avoid touching or pressing the OLED screen to prevent potential damage.
- Keep all packing materials away from children to avoid any risk of suffocation.
- The installation should be carried out by a licensed electrician, adhering to all local codes and standards.
- Use the appropriate safety equipment when connecting to a main switchboard.
- Do not attempt to modify the charging station, as this may void the warranty.
