Mounting the SW-MOTECH BC.SYS.06.435.20000B SysBag 30 Bag System requires careful attention to detail. Here's a general guide; always consult the specific instructions included with your system for precise details.
-
Preparation:
- Thoroughly review the mounting instructions and ensure all parts are accounted for.
- Park your motorcycle on a level, stable surface.
- Turn off the engine, remove the key, and allow the exhaust to cool.
- Disconnect the vehicle battery if working near the electrical system.
- Gather necessary tools and consider having a helper.
-
Mounting:
- Reinstall all removed motorcycle parts according to the manufacturer's specifications or replace them with SW-MOTECH parts.
- Secure all threads with medium-strength liquid thread locker, unless otherwise specified.
- Refer to the specific mounting instructions for your side carrier type (EVO, PRO, STEEL-RACK, ADVENTURE RACK, etc.) and follow the provided steps.
- Attach the SysBag 30 adapter plate to the side carrier or rack using the specified screws; tighten to the torque specified in the manual.
- Pay close attention to the adapter plate alignment; ensure the locking mechanism and lock bolt are positioned correctly.
- Use liquid thread locker on screws as indicated in the manual.
- Double-check all parts and connections for proper installation and tightness.
-
Function Check:
- Confirm that all previously removed parts are correctly replaced.
- Verify that no moving parts are obstructed and that the motorcycle's functions are unimpeded.
- Check that cables and hoses are not rubbing or pinched.
- Conduct a comprehensive function check before riding.
- After the first 50 km and at regular intervals, re-check the tightening torque of all connections and the proper fit of the SysBag 30 Bag System. These steps offer a general overview, but consulting the included SW-MOTECH instructions is crucial for a successful and safe installation.
