How do I install the FEIT Electric S10CNPY 850 BZ 10 inch Commercial Canopy 5000K LED Security Light?

[DePaislee]

Installing your FEIT Electric S10CNPY 850 BZ 10 inch Commercial Canopy 5000K LED Security Light involves a few key steps that vary based on your chosen mounting method. Please ensure the power is off before beginning any installation. Here's a general guide for each method:

Pendant Mount Installation:

1. Loosen the screws labeled "A" on the side of the canopy fixture and remove the mounting plate and rubber plug.
2. Connect the power supply wires from the pendant rod to the fixture, ensuring correct wiring.
3. Securely connect the 3/4 inch pendant rod into the fixture.

Junction Mount Installation:

1. Loosen screws "A" on the canopy fixture's side and remove the mounting plate.
2. Feed the power supply wires through the center of the mounting plate and attach the plate to the junction box.
3. Hang the canopy fixture onto the mounting plate and complete the wiring. Lock the fixture into place.

Ceiling Mount Installation:

1. Loosen screws "A" on the canopy fixture and remove the mounting plate.
2. Disassemble the canopy fixture by removing the diffuser lens and reflector.
3. Drill four holes in the canopy fixture for ceiling mounting.
4. Mount the canopy onto the ceiling surface using appropriate anchors and screws.
5. Connect the power supply wires to the fixture and reassemble the reflector and diffuser lens onto the canopy fixture.

Always follow the wiring diagrams in the FEIT Electric S10CNPY 850 BZ 10 inch Commercial Canopy 5000K LED Security Light instruction manual for each specific mounting type. For safety, we recommend that installation be performed by a qualified electrician to prevent fire, explosion, or electric shock. For detailed instructions, consult the FEIT Electric S10CNPY 850 BZ 10 inch Commercial Canopy 5000K LED Security Light instruction manual.