How do I install the attachments on my Metcalfe MP30 mixer?

[DelArianna]

Installing attachments on your Metcalfe MP30 mixer is straightforward. Here's a step-by-step guide:

1. Ensure the mixer is turned off and the bowl is raised.
2. Locate the attachment hub thumbscrew on the front of the mixer and loosen, then remove it.
3. Take off the plastic cover from the attachment hub.
4. Lightly lubricate the attachment shaft with food-grade grease or mineral oil. This will help with smooth operation and longevity.
5. Insert the attachment shaft into the hub, aligning the alignment pin with the hub hole.
6. Rotate the attachment clockwise to secure it firmly onto the planetary shaft.
7. Tighten the thumbscrew back into the hub, making sure it's secure.
8. Choose your desired speed setting using the speed control lever.
9. Press the start button on the control panel to begin mixing.

Important safety notes: Always turn off the Metcalfe MP30 mixer before installing or removing any attachments. Also, confirm that the bowl is raised and the bowl guard is closed. The mixer is designed with safety features that prevent operation if these conditions aren't met.