Installing your new SUMMIT Auto Defrost All Refrigerator is straightforward. Here's a step-by-step guide:
- Location: Place the refrigerator on a solid, level surface capable of supporting its weight when full. Ensure the area is well-ventilated and away from direct sunlight, heat sources, and humidity.
- Leveling: Use a wrench to adjust the front leveling legs until the refrigerator is perfectly level. This is crucial for efficient operation.
- Clearance: Maintain at least 2 inches of space behind the refrigerator for proper airflow. Avoid covering or obstructing the bottom grill.
- Spacers (if applicable): If your model includes rear spacers, attach them to the condenser tube at the back of the refrigerator to provide adequate space from the wall.
- Power Connection: Plug the refrigerator into a grounded 115V AC/60Hz electrical outlet that matches the voltage on the appliance label. Do not use an extension cord.
- Door Swing Reversal (optional): If you want the door to open from the other side, consult the manual for instructions on reversing the door swing. Note that not all models offer this feature.
- Handle Installation (if necessary): If your model requires handle installation, align the handle with the designated holes on the preferred side. Secure the handle with the provided screws and cover the screw heads with the handle seal.
After installation, adjust the temperature using the thermostat inside the unit. Refer to the manual for cleaning, maintenance, and troubleshooting guidance.
