How do I connect the LEDGEAR DALI DT6 TC Rotary Dimmer in Master Mode with multiple slave dimmers?

[VanJune]

Wiring the LEDGEAR DALI DT6 TC Rotary Dimmer in Master Mode with slave dimmers involves a few key steps. First, for the master dimmer, connect it to both the AC power supply and the DALI bus. The master dimmer utilizes an active power supply. For each slave dimmer, connect it only to the DALI bus. The slave dimmers use an inactive power supply, drawing power from the DALI bus. Ensure that the total number of DALI devices, including the master and all slaves, does not exceed the maximum limit specified in the LEDGEAR DALI DT6 TC Rotary Dimmer manual. When connecting the wiring, use a cross-section of up to 2.5 mm² for both the AC power input and the DALI bus cables. The total length of the power cable should not exceed 300 meters, and the total length of the DALI bus cable should also be kept to a maximum of 300 meters. A single LEDGEAR DALI DT6 TC Rotary Dimmer in Master Mode can support up to 46 DALI devices. Each dimmer draws 4mA from the DALI bus. By adhering to these guidelines, you can successfully set up the LEDGEAR DALI DT6 TC Rotary Dimmer in Master Mode with multiple slave dimmers.