···
Log in / Register

How do I connect my POGS Kids Wireless Headphones to my phone?

1Answers
MacJeffrey
12/17/2025, 10:22:21 AM

Pairing your POGS Kids Bluetooth Wireless Headphones with your smartphone is easy! Here's a step-by-step guide:

  1. Put your POGS headphones into pairing mode: Press and hold the Bluetooth pairing button on your headphones for about 5-7 seconds. You'll know they're ready when the LED light flashes alternately blue for 1 second and white for 1 second.
  2. Turn on Bluetooth on your phone: Go to your phone's settings and enable Bluetooth.
  3. Search for devices: Your phone will automatically start looking for nearby Bluetooth devices.
  4. Select your POGS headphones: Look for "My POGS Wireless Headphones" or "POGS Gecko" in the list of available devices on your phone and tap on it.
  5. Pair the devices: Follow any on-screen prompts to complete the pairing process.
  6. Check the connection: Once paired, the LED light on your POGS headphones will blink blue every 7 seconds in 1-second intervals, confirming a successful connection.
  7. Disconnecting: To disconnect, either turn off Bluetooth on your smartphone or switch off your POGS headphones.

If you're having trouble, make sure your phone and headphones are close to each other. Also, double-check that Bluetooth is enabled on your phone. If you still have issues, check the troubleshooting section in your POGS user manual or contact POGS customer support for assistance.

Was this review help?
106
Share
More Q&A

How often should I clean my Mozzie Stoppas High Flow Anaconda with Removable Screen?

To keep your Mozzie Stoppas High Flow Anaconda with Removable Screen working its best, regular cleaning of the mesh cartridge is key. The installation guide suggests a routine maintenance schedule to prevent any blockages and maintain top-notch performance. Luckily, it's designed for easy cleaning simply pull the handle directly out of the body to remove the mesh cartridge, clean it thoroughly, and then firmly reinsert it. This simple step helps ensure optimal water flow and keeps mosquitoes and pests out of your tank. Also, check the mesh cartridge O-ring from time to time to make sure it's sealing properly.
118
Share

How do I correctly position the microphone on my Honeywell SRX Series Wireless Headset

To ensure optimal performance with your Honeywell SRX Series Wireless Headset, proper microphone placement is key. The ideal microphone position is approximately 1 inch (or 2cm) from the corner of your mouth. This placement helps capture your voice clearly while minimizing background noise. To adjust the microphone: Wear the headset securely, ensuring the stability strap is properly fitted. Position the microphone near the corner of your mouth, maintaining the 1-inch (2cm) distance. Gently adjust the microphone to achieve the most comfortable and effective position. Following these steps will help you maximize the clarity of your communication, particularly when using your SRX Series Wireless Headset with Honeywell A-series Mobile Devices.
117
Share

Troubleshooting Lutron DVRF-AS Smart Accessory Switch Issues Load not turning ON or Accessory Switch not working?

If you're experiencing problems with your Lutron DVRF-AS Smart Accessory Switch in a 3-way or 4-way setup, here's how to troubleshoot common issues. Load Won't Turn On or No LEDs Illuminate: Possible Causes: The Front Accessible Service Switch (FASS) on the main dimmer or switch is OFF. The light bulbs are burned out. The circuit breaker is OFF or has tripped. There's a wiring error. Troubleshooting Steps: Make sure the FASS on the main dimmer or switch is in the ON position. Check if your light bulbs are working. Verify that the circuit breaker is ON and hasn't tripped. Carefully review the wiring connections. Refer to the wiring diagrams provided or use the wiring wizard at lutron.com/wiringwizard for assistance. Accessory Switch Isn't Working: Possible Cause: The wire connected to the blue wire on the main dimmer or switch doesn't match the wire connected to the blue wire on the accessory switch. Troubleshooting Steps: Double-check that the wire connected to the blue wire on the main dimmer or switch is the same wire connected to the blue wire on the accessory switch. Load Doesn't Stay ON and Dimmer/Switch LEDs Glow Dimly or Blink: Possible Cause: The blue wire is incorrectly wired to the neutral wire or is touching ground. Troubleshooting Steps: Inspect the wiring to ensure the blue wire is correctly connected and isn't touching the neutral wire or ground. This can cause the load to malfunction and the LEDs to behave erratically. For further support and detailed guidance, visit the Lutron website.
103
Share

How do I determine if my AV equipment is compatible with the B-TECH BT7875 Mounting Plate?

To ensure your AV equipment is suitable for the B-TECH BT7875 Mounting Plate, consider these factors: First, check the weight of each component. The BT7875 has a specified weight limit to 3kg (6.6lbs), with a maximum load capacity up to 4kg (8.8lbs). Ensure your equipment's weight falls within these limits. Second, assess the dimensions of your AV equipment against the plate's measurements: Width 90mm, Height 60mm, and Depth 63mm. Third, review the installation options outlined in the instructions; rail, pole, and column mounting are typical, so confirm these align with your desired setup. If you're uncertain, consulting an AV professional or contacting B-Tech AV Mounts directly is recommended. Always prioritize safety and carefully follow installation instructions for secure mounting.
113
Share

How often should I check and clean the Solar Shield and Tank Screen for my rainwater system?

To keep your rainwater harvesting system running efficiently, regular maintenance is key. Rain Harvesting Pty Ltd indicates that the Solar Shield is designed to be maintenance-free when correctly installed. However, it's a good idea to periodically inspect and clean the Tank Screen located above the Solar Shield. Inspecting the Tank Screen every three months can help prevent problems like algae growth or sediment buildup, ensuring your water quality remains high. If you see any debris or contaminants accumulating, clean both the Tank Screen and Solar Shield. For specific guidance or any concerns, contact Rain Harvesting Pty Ltd directly.
115
Share

When should I replace the filter cartridge in my RAIN HARVESTING WFRC11?

To ensure your RAIN HARVESTING WFRC11 Multi Action Slim Cartridge continues to deliver optimal performance, timely replacement is key. Here's when to consider a cartridge change: If the filter hasn't been used for a long time, it's best to disconnect the device, remove the cartridges, and store them somewhere cool and dry until you need them again. After not using the system for more than two days, flush the system for 10 minutes before use. For periods of non-use exceeding two weeks, replacing the cartridge may be necessary. Regular upkeep and cartridge replacement are vital for maintaining filtered water quality and your filtration system's efficiency.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.