Connecting your MOES MS-104B Smart Lighting Controller to your Wi-Fi network involves a few key steps. To ensure a smooth setup, make sure your smartphone is near the switch module and has a strong Wi-Fi signal (at least 50%). Before pairing, complete the wiring of the switch module.
Here's how to connect, broken down into two methods:
Method 1 (New Updated):
- Ensure your phone has both Wi-Fi and Bluetooth enabled.
- Open the Smart Life or Tuya App and tap the "+" icon.
- Select your MOES MS-104B Smart Lighting Controller from the device list.
- Enter your Wi-Fi password and wait for the connection to complete.
Method 2 (Traditional Pairing):
- After wiring, initiate pairing mode.
- For reset switches: Press the switch button 10 times until you hear continuous beeping.
- For rocker light switches: Toggle the switch (ON/OFF) 20 times (10 cycles) until you hear continuous beeping.
- For the switch module: Long-press the reset button on the module until you hear specific beeping patterns.
- Open the Smart Life or Tuya App, tap "+", and select "Switch (Wi-Fi)" to add the device.
- Confirm that your smartphone and the switch module are on the same 2.4GHz Wi-Fi network.
- Verify that the light on the switch module is rapidly blinking.
- The connection process usually takes 10-120 seconds.
- Once successful, the switch will appear in the App.
If you have trouble, double-check that your phone and the switch module are on the same Wi-Fi network, and carefully follow the pairing instructions. If problems persist, consult the troubleshooting section in your MOES MS-104B manual or contact MOES customer support for help.
