···
Log in / Register

How do I change the pen nib on my HUION H950P tablet?

1Answers
SanJameson
12/17/2025, 06:34:15 AM

Replacing the pen nib on your HUION H950P drawing tablet is a simple process. Here's how: First, unscrew the pen holder by rotating the top part counter-clockwise. This will open the cover. Next, take a fresh nib from its packaging. Now, place the new nib into the hole located at the bottom of the pen holder. Then, use the pen itself to remove the old nib by tilting the pen to pull it out. Finally, insert the new nib straight into the pen and gently but firmly push it in until it stops. Regular nib replacement ensures the best drawing experience with your HUION H950P.

Was this review help?
113
Share
More Q&A

My Keurig K-Elite brewer seems sluggish What's the best way to descale it?

If your Keurig K-Elite coffee maker is brewing slowly or the coffee doesn't taste right, it likely needs descaling. Here's how to do it: Empty the water reservoir and remove any Keurig Water Filter if present. Pour a full bottle of Keurig Descaling Solution into the water reservoir. Fill the empty descaling solution bottle with water and add it to the reservoir. Power on the brewer. Place a large mug on the drip tray. Initiate a rinsing brew cycle using the hot water button and the largest brew size. Repeat this rinsing brew process until the "add water" light comes on. Do not insert a K-Cup pod. Allow the brewer to sit, turned on, for at least 30 minutes. After 30 minutes, discard any remaining solution from the water reservoir and rinse the reservoir thoroughly. Fill the water reservoir with fresh water to the MAX fill line. Put a large mug on the drip tray and run rinsing brews using the largest brew size. Again, don't use a K-Cup pod. Empty the mug's contents into the sink. Repeat the brew cycle until you've completed a minimum of 12 rinsing brews at the largest size. You may need to refill the water reservoir during this process. Once finished, your Keurig K-Elite should be ready to brew delicious coffee again. For optimal performance and to extend the life of your Keurig K-Elite, descale it every 3 to 6 months.
102
Share

How do I connect my smartphone to the GPX PJ300B Mini Projector via Bluetooth?

Connecting your smartphone to the GPX PJ300B Bluetooth Mini Projector is straightforward. Here's a step-by-step guide: First, navigate to the projector's menu or settings section. Then, locate the Bluetooth option within the settings and activate it. Next, on your smartphone, go to your Bluetooth settings and turn Bluetooth on. Your smartphone will then search for available devices. The GPX PJ300B should appear in the list. Select it to initiate pairing. You may be prompted to enter a PIN, so follow any on-screen instructions. Once paired, you'll see a confirmation message on both the projector and your phone. Finally, you can stream content from your smartphone to the projector by opening your desired app or media file. The content should then display on the projector. Ensure both devices are within Bluetooth range for optimal connectivity, and consult the GPX PJ300B's user manual for specific troubleshooting tips.
114
Share

How do I inflate balloons with the YWFTING 73005 Electric Air Balloon Pump

Inflating balloons with the YWFTING 73005 Electric Air Balloon Pump is straightforward. Here's a simple guide: Setup : Place the YWFTING 73005 pump on a stable surface and plug it into a power outlet. Nozzle Selection : Choose the nozzle size that best fits your balloons. The pump includes multiple nozzles to accommodate various balloon sizes. Inflation Process : Attach the Balloon : Securely place the neck of the balloon over the chosen nozzle. Choose a Mode : The pump offers two inflation modes: automatic and manual. Automatic Mode : Turn on the pump, and it will continuously inflate the balloon until you switch it off. This is suitable for filling many balloons quickly. Manual Mode : Press the blue nozzle to release bursts of air, giving you more control over the inflation. This is ideal when you need to control the size of the balloon carefully. Completion : Once the balloon reaches the desired size, switch off the pump, and carefully remove the balloon from the nozzle. Remember, the YWFTING 73005 Electric Air Balloon Pump is an air pump, so balloons inflated with it will not float. Use the included tools to tie the balloons. If you need further assistance, please reach out to customer support.
112
Share

How do I control the fan speed on my KeiBn DCX-A13 Laptop Cooling Pad?

Adjusting the fan speed on your KeiBn DCX-A13 Laptop Cooling Pad is straightforward. Here's how: First, find the LCD operation panel located on the cooling pad. Next, use the buttons or menu options on the LCD panel to enter the fan speed settings. You'll find six different fan speed gears to choose from, allowing you to customize the cooling intensity to your specific needs. Finally, select your preferred fan speed using the controls on the LCD panel, and the cooling pad will automatically adjust the fan rotation. For more detailed visual instructions, please consult the user manual that came with your KeiBn DCX-A13 Laptop Cooling Pad.
101
Share

How do I connect my Ray-Ban RW-4006 Meta Wayfarer Smart Glasses to my phone?

Pairing your Ray-Ban RW-4006 Meta Wayfarer Smart Glasses with your smartphone is straightforward. First, enable Bluetooth on your smartphone. Next, put your Ray-Ban smart glasses into pairing mode. This typically involves pressing and holding a button on the glasses or using the Ray-Ban app. Consult the user manual for your specific model for precise instructions on entering pairing mode. Then, in your smartphone's Bluetooth settings, find and select your Ray-Ban smart glasses from the list of available devices to initiate the pairing. Upon successful pairing, you'll receive a confirmation on both your smartphone and the glasses. If you experience any issues, double-check that Bluetooth is enabled on your phone and that the glasses are in pairing mode. Ensure your smart glasses aren't already connected to another device. For model-specific instructions or troubleshooting, refer to your user manual or the Ray-Ban mobile app. The exact steps might vary slightly depending on your smartphone's operating system.
109
Share

How do I add more fans to my DEEPCOOL CL500 Mid-Tower case?

Upgrading the cooling in your DEEPCOOL CL500 Mid-Tower case is straightforward. Here's how to install additional fans for improved airflow: Fan Compatibility: The CL500 case offers flexible fan support: Front: Supports either 3x120mm fans or 2x140mm fans. Top: Accommodates 2x120mm fans. Rear: Fits 1x120mm fan. Installation Guide: Front Fans: Begin by removing the front panel, as detailed in your DEEPCOOL CL500 manual. Secure the fans (either three 120mm or two 140mm) using the provided screws. Top Fans: Detach the top panel to access the fan mounting area. Attach two 120mm fans, using the appropriate screws. Rear Fan: Install a single 120mm fan at the rear fan location. Power Connections: Connect the fans to the fan headers on your motherboard or a fan controller for power. Final Check: After installation, power on your system and confirm that the new fans are operating correctly. For visual assistance, refer to the DEEPCOOL CL500 Mid-Tower Case user manual.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.