Changing the hydraulic oil in your Scheppach HL1800GM log splitter is a crucial maintenance task. Here's a step-by-step guide to help you do it safely and effectively: First, position your log splitter on a slightly elevated surface, such as a euro pallet. This will make it easier to access the drain plug. Next, place a container with a capacity of at least 18 liters under the drain plug, located on the splitting column, to catch the used oil. Carefully unscrew the drain plug, allowing the old hydraulic oil to drain completely into the container. To speed up the draining process, you can also open the filling point located on top of the splitting column. Once the oil has drained, replace the drain plug and its seal, ensuring it's securely tightened. Now, it's time to add fresh hydraulic oil. Pour the new oil into the hydraulic tank. The amount of oil required can be found in the technical data section of your Scheppach HL1800GM log splitter's instruction manual. After filling, check the oil level using the dipstick found on the filling point. The oil level should be between the minimum and maximum marks indicated on the dipstick. After changing the oil, run the log splitter a few times without splitting any wood to allow the new oil to circulate properly throughout the system. Remember to always loosen the filling point before starting and never forget this step, as failing to do so could damage the hydraulic circuit and void your warranty. For detailed information and safety precautions, please consult your Scheppach HL1800GM log splitter's instruction manual.
