How do I change the emissivity setting on my VOLTCRAFT 2633256 thermal imaging camera

[MackenzieAnn]

To ensure accurate temperature readings with your VOLTCRAFT 2633256 thermal imaging camera, adjusting the emissivity is key. Here's how to do it:

1. Access the Settings Menu: While in Capture mode, press the Confirm/Menu OK button. This will bring up the settings menu.
2. Navigate to Emissivity: Use the Up/Down buttons to scroll through the menu options until you find the Emissivity (EMS) setting.
3. Adjust the Value: Use the Up/Down buttons to change the emissivity value. Holding the buttons down will allow for continuous adjustments.
4. Confirm the Setting: Once you've set the correct emissivity for your material, press the Confirm/Menu OK button to save the change.
5. Exit the Menu: Press the Back/Power button to exit the settings menu and return to the normal operating mode.

Helpful Tips:

• The default emissivity is usually 0.95, which works well for many common materials like painted surfaces and organic materials.
• Consult the material emissivity chart in your camera's manual to find the correct value for specific materials.
• Accurately setting the emissivity is vital for precise temperature measurements, especially with materials that have lower emissivity values.