Synchronizing your WA-100/101 True Diversity Wireless Receiver with a compatible transmitter is straightforward. Here's a guide tailored to different transmitter types:
For Beltpack Transmitters (WA-BP1 or WA-BP2):
- Power on your beltpack transmitter.
- Open the battery compartment of the beltpack.
- Press the IR-SW button on the WA-100/101 receiver. The receiver's IR LED will begin to flash.
- Position the open battery compartment of the beltpack transmitter directly towards the receiver's IR LED.
- Observe the receiver's IR LED; it should change from flashing to a pulsing pattern, signaling successful communication.
- Once the receiver's IR LED turns off, the synchronization is complete. Check the beltpack's display. You should now have an active audio signal on your receiver.
For Handheld Microphone Transmitters (WA-HH1 or WA-HH2):
- Switch on your handheld microphone transmitter.
- Open the battery compartment.
- Press the IR-SW button on the WA-100/101 receiver; the IR LED will flash.
- Align the IR IN component within the handheld microphone's battery compartment with the receiver's IR LED.
- The receiver's IR LED will transition from flashing to pulsing, confirming synchronization.
- When the receiver's IR LED turns off, the sync is done. Confirm on the handheld microphone's display. Your receiver should now be receiving audio.
For Podium Microphone Transmitters (WA-PM1 or WA-PM2):
- Turn on the podium microphone transmitter.
- Press the IR-SW button on the WA-100/101 receiver. The IR LED on the receiver will flash.
- Point the IR RX LED on the podium microphone transmitter towards the receiver's IR LED.
- The receiver's IR LED will change to a pulsing pattern, indicating that they are communicating.
- Once the receiver's IR LED goes off, the process is complete. Check the display on the podium microphone. Your receiver should now have live audio.
Following these steps will ensure seamless audio transmission with your WA-100/101 True Diversity Wireless Receiver.