How do I assemble the MoMi Iris Tricycle?

[VonVictoria]

Assembling your new MoMi Iris Tricycle is straightforward! Here's a simplified guide to get you started:

1. Rear Wheels: Attach the rear wheels to the frame. Align the wheel needle with the frame's hole and push until you hear a click. Test the connection by gently pulling on the wheel to ensure it's secure. Repeat for the other rear wheel.
2. Front Fender: Place the fender onto the front wheel tube, ensuring the hole is on the left side.
3. Front Wheel: Insert the front wheel tube into the designated hole on the bike's frame. Make sure it's firmly seated.
4. Handlebar: Insert the handlebar into its frame hole and secure it tightly.
5. Saddle Pad: Place the saddle pad on the frame with the curved side facing down.
6. Seat Assembly: Cover the seat with the textile material. Secure the seat to the frame using the provided hardware, ensuring a snug fit. Tighten until the seat is stable.
7. Backrest: Insert the backrest into the designated holes on the seat; it should fit firmly.
8. Canopy: Slide the hood onto the tabs on the backrest.
9. Parent Steering: Connect the parent steering wheel parts and insert them into the hole behind the seat until it clicks. Attach the plastic cover from underneath and tighten.
10. Steering Rod: Thread the steering rod through the front fender hole and the plastic cap from step 10, then tighten.
11. Rear Basket: Finally, slide the rear basket onto the rear wheel frame.

Following these steps carefully will ensure your MoMi Iris Tricycle is assembled correctly and ready for your child's adventures. Always double-check all connections before use to guarantee safety.