Adjusting the settings on your WeTeLux 975350 solar floodlight with a motion sensor allows you to customize its performance. Here's how to adjust sensitivity and duration:
-
Sensitivity Adjustment:
- Locate the SENS adjustment control on the device. This controls the sensitivity of the infrared sensor.
- Turning the SENS control towards the negative (-) direction decreases the sensitivity. This determines the maximum distance, up to 10 meters, at which the sensor will be triggered by movement.
-
Duration Adjustment:
- Find the TIME adjustment control on the device; this allows you to set how long the light stays on after motion is detected.
- Adjust the TIME control to set the light duration, ranging from approximately 3 seconds to 7 minutes. Turning it toward the + increases the time and - decreases it.
- Note that if motion is detected while the light is already on, the light's duration is reset from the most recent motion detection.
-
Brightness Control:
- The brightness control uses a photocell to detect ambient light conditions.
- The 🌞 position activates the light regardless of the time of day, triggered by the infrared sensor.
- The 🌙 position activates the light only at night.
- Use the LUX control to set when the unit activates, based on ambient light conditions. Adjust this to your desired brightness level. Following these steps will help you customize your WeTeLux 975350 solar floodlight's performance.
