Changing the blade on your BORMANN BDX2130 Falchoprion with Cutting Disc requires following these steps to ensure safety and proper function: First, unplug the tool from the power source. Next, release the blade guard by pressing the lever and rotating it upwards. Then, use the provided multi-tool to loosen the appropriate fastener on the guard mounting plate, sliding it upwards to expose the blade. Engage the spindle lock button fully, holding it in place. Use the multi-tool to slightly turn the clamping fastener until the spindle locks. Now, loosen the clamping fastener clockwise to remove it, along with the outer flange and the old blade; do not remove the inner flange. Install the new blade, ensuring it fits correctly on the inner flange and that its rotation direction matches the indicator on the guard. Secure the new blade with the outer flange and clamping fastener, tightening the fastener counter-clockwise with the provided tool. Manually rotate the blade to check for smooth operation. Finally, reassemble the guard mounting plate and blade guard in reverse order. After reassembly, power on the tool and let it run idle for about a minute to confirm proper installation; stop immediately and recheck if any unusual vibrations or sounds are detected. Always consult the official BORMANN BDX2130 Falchoprion with Cutting Disc instruction manual for detailed instructions and all safety guidelines.
