Relocating the collector box on your BroilMaster Premium Grill DPP157 involves a few steps to ensure everything functions correctly. Here's a guide to help you through the process:
-
Prep the Grill: Begin by removing the cooking grids, smoker shutters, briquettes, plaques, and briquette racks from the grill. Also, disconnect both wires attached to the electronic ignitor found on the control panel.
-
Remove Burner and Collector Box: Carefully take out the burner and place it upside down on a stable work surface. Remove the two screws that secure the burner bracket and collector box to the burner. Discard the old collector box and reinstall the screws and burner bracket.
-
Prepare for New Collector Box Location: Unscrew the hex nuts inside the grill to remove both the control panel shield and the control panel itself. Use the provided drilling template to accurately mark the new location for the collector box. Drill a pilot hole through the front of the casting using a 1/8" drill bit, then enlarge it to the correct size (7/16") to accommodate the new collector box.
-
Install the New Collector Box: Install the new collector box at the prepared location, following the instructions in the most current installation manual for your BroilMaster Premium Grill DPP157. Make sure to connect the ground wire to the ground lug and feed both ground and electrode wires through the hole in the Control Panel Shield.
-
Reconnect Ignitor Leads: Consult the parts assembly list to ensure all components are properly installed. Double-check all connections to make sure everything is securely in place.
Following these steps, along with consulting the current installation manual for your specific BroilMaster model, should allow you to successfully relocate the collector box on your BroilMaster Premium Grill DPP157. If you have any issues or further questions, you can contact the manufacturer's customer support or visit their website for assistance.
