···
Log in / Register

Will traffic police check if changing from 16-inch to 18-inch wheels?

6Answers
LondonLee
07/29/2025, 12:58:21 AM

Changing from 16-inch to 18-inch wheels will be checked by traffic police. Here are the relevant details: Introduction: Illegal modification of motor vehicles will result in fines and an order to restore the original condition. If the structure, construction, or characteristics of a registered motor vehicle are altered, the owner must apply for a modification registration with the vehicle management office within ten days of the change; otherwise, they will be penalized according to the law. Notes: If owners wish to modify their wheels, they must not change the wheel size. Otherwise, the modification will not pass the annual inspection, and if discovered by traffic police, it will result in fines, making it not worth the effort. It is recommended that unless the wheels are damaged, owners should avoid unnecessary modifications.

Was this review help?
108
Share
DeZoe
08/12/2025, 02:07:00 PM

As a young car owner who frequently modifies my vehicle, last year I upgraded my wheels from 16 inches to 18 inches, which made the car look much cooler. However, while driving in the city, I was stopped by traffic police during a routine check. The officer immediately pointed at the wheels and asked if they were the original size. Upon checking the records and finding a discrepancy, I was issued a ticket and told that points would be deducted from my license. Later, I visited the vehicle management office and learned that changing to larger wheel sizes requires registration; otherwise, it violates vehicle safety regulations. Now, I’m cautious about making modifications and advise anyone looking to upgrade to first check local traffic laws or consult with a modification shop to avoid unnecessary expenses and trouble.

Was this review help?
5
Share
Expand All
LeSamantha
10/03/2025, 12:53:05 AM

As someone with car repair experience, I've helped many owners replace their rims. When upgrading from 16-inch to 18-inch rims, it's crucial to match the tire size properly. Otherwise, the speedometer readings may become inaccurate, and braking distances could increase. During routine patrols or annual inspections, traffic police will verify the rim specifications against the vehicle's documentation. If discrepancies are found, penalties can range from fines of several dozen to hundreds of yuan, or in severe cases, mandatory restoration to original parts. It's advisable to measure ground clearance and load index before modification to avoid safety hazards or drawing police attention.

Was this review help?
15
Share
Expand All
VanGenesis
11/16/2025, 01:32:43 AM

I always emphasize the importance of complying with traffic regulations, as changes in wheel size directly affect the overall vehicle design. According to domestic laws, any non-OEM wheel modifications must meet standards; otherwise, traffic police have the authority to enforce penalties in any scenario, including roadside checks or accident scenes. Upgrading to 18-inch wheels may cause stability issues and increase risks. It is recommended that car owners refer to the vehicle manual and complete necessary filings to ensure full compliance with the law.

Was this review help?
16
Share
Expand All
DeKimberly
01/06/2026, 03:09:21 AM

For friends who want to change their rims, simply put, be cautious when upgrading from 16-inch to 18-inch. First, check if the original vehicle specifications support larger sizes. Some models are compatible, but most require official registration. Traffic police usually don't actively inspect, but they can be very strict during annual inspections or after accidents. If problems are found, fines or even towing may occur. I recommend doing it at a reputable shop to ensure safety.

Was this review help?
9
Share
Expand All
VonChristian
04/03/2026, 02:28:56 AM

I believe safety should always come first. While upgrading to larger rims may enhance aesthetics, it can also negatively impact driving performance, such as increased bumpiness or unstable steering. Traffic police pay special attention to such modifications during inspections, and non-compliant alterations could lead to heightened liability in case of accidents. With years of driving experience, I only recommend maintaining original factory parts to ensure safety.

Was this review help?
1
Share
Expand All
More Q&A

How to Remove the Steering Wheel of a 7th Generation Accord?

The method to remove the steering wheel of a 7th generation Accord is as follows: 1. Disconnect both the positive and negative battery cables, remove the lower inspection cover from the steering wheel lower cover, and then remove the shorting connector; 2. Disconnect the connector between the airbag and the spiral cable, and connect the shorting connector to the airbag side connector; 3. Remove the right inspection cover and the cruise control set and resume switch cover; 4. Remove the two bolts, then remove the driver-side airbag assembly; 5. Disconnect the connectors from the horn and cruise control set and resume switches, then remove the cable reel connector from the clip; 6. Remove the steering wheel nut to complete the process.
101
Share

Which Hybrid Vehicles Are Eligible for Green License Plates?

Plug-in hybrid vehicles are eligible for green license plates. Examples of plug-in hybrid vehicles include: Lynk & Co 01, BYD Song, BYD Qin, BYD Qin Pro, BMW 7 Series, etc. Taking the BMW 7 Series as an example, it belongs to the full-size car category with the following dimensions: length 5250mm, width 1902mm, height 1498mm, wheelbase 3210mm, fuel tank capacity 46l, trunk capacity 420l, and curb weight 2190kg. The BMW 7 Series is equipped with a 2.0t turbocharged engine, delivering a maximum horsepower of 258ps, maximum power of 190kw, maximum torque of 400nm, and is paired with an 8-speed automatic transmission.
119
Share

Does a 4AT Transmission Only Have 4 Gears?

4AT transmission only has 4 gears. 4AT stands for 4-speed automatic transmission, which is a basic type of automatic transmission for cars. The four gears refer to park, reverse, drive, and neutral. AT transmissions do not require a clutch for shifting, making them relatively simple to operate. Currently, there are four common types of automatic transmissions in cars: hydraulic automatic transmission (AT), continuously variable transmission (CVT), automated manual transmission (AMT), and dual-clutch transmission (DCT). Automatic shifting means that while driving, the driver controls the accelerator pedal as needed, and the automatic transmission can automatically shift into different gears based on engine load and the vehicle's operating conditions.
117
Share

Does the Sylphy have a manual transmission?

Yes, the Sylphy does have a manual transmission. The function of a manual transmission is to manually shift the gear lever to change the gear engagement position inside the transmission, thereby altering the gear ratio to achieve speed variation. Taking the 2021 Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1188kg. The 2021 Sylphy features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
117
Share

What is the 0-100 km/h acceleration time of the Bugatti Veyron?

Bugatti Veyron accelerates from 0 to 100 km/h in 2.5 seconds. Here is a detailed introduction to this car: Overview: The Bugatti Veyron is registered in the Chinese market as the Bugatti Veyron, a world-class supercar model. The brand originates from Italy, is produced by a French manufacturer, and is owned by the German Volkswagen Group. Product Series: The Veyron series mainly includes models such as the SuperSport, GrandSport, Vitesse, Hermès Special Edition, and Ceramic Special Edition, all equipped with an 8.0L W16 quad-turbocharged engine, with a top speed of 434 km/h.
105
Share

What Causes Oil Dripping from the Exhaust?

Oil dripping from the exhaust is caused by damage to the Positive Crankcase Ventilation (PCV) system. The solution to oil dripping from the exhaust is to replace the PCV system. To prevent excessive crankcase pressure, extend oil service life, reduce component wear and corrosion, and prevent engine oil leaks, crankcase ventilation is essential. To meet increasingly stringent emission requirements and improve fuel economy, the design of the crankcase ventilation system is also a critical part of automotive engine design. The Positive Crankcase Ventilation system can be simply understood as a gasoline recovery system. Without this system, vehicles would experience increased oil levels. The PCV system separates the mixed oil and gas that enters the crankcase, allowing the oil to return to the oil pan and the gasoline vapors to re-enter the combustion chamber for further combustion.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.