Will speeding at the starting point of an average speed check result in penalty points and fines?

2 Answers
DiSimon
07/29/25 7:48am
Speeding at the starting point of an average speed check is considered a traffic violation and will result in penalty points and fines. Below is relevant information about average speed checks: 1. Definition of average speed check: An average speed check involves setting up two adjacent monitoring points on the same road section. The principle is to calculate the vehicle's average speed on that section based on the time it takes to pass between the two monitoring points, and determine whether the vehicle is speeding according to the speed limit standard for that section. 2. How the average speed check system works: The average speed check system establishes a monitoring and capture system by installing cameras at road checkpoints. It conducts real-time monitoring and capturing of vehicles passing through the monitored area at the checkpoints to obtain information such as the vehicle's speed, traffic flow, license plate number, color, approximate physical size, and driver characteristics. This information is then transmitted via a network to the public security traffic command center and traffic control sub-center databases for data storage, querying, comparison, and other processing.
Was this review help?
7
1
Share
SanAlana
08/12/25 11:03am
I often drive on highways for business trips to other cities. Once, I slightly accelerated to 110 km/h at the entrance of an average speed check zone, and ended up getting a ticket sent to my home. There are high-definition cameras monitoring the starting point, and any speeding is immediately captured, resulting in penalty points and fines. Even if the average speed didn’t exceed the limit, just that one point was recorded. Penalty points usually range from 2 to 6, depending on how much you exceeded the speed limit, and fines vary from 100 to 1,000 yuan. I recommend not underestimating the entrance—drive within the speed limit and use navigation apps to get early warnings about the entry points, so you’re mentally prepared. Safety first—saving a little time isn’t worth the risk of an accident. Make it a habit to turn on cruise control as soon as you get in the car, so you don’t get tempted to press the accelerator and cross the line.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What are the consequences of not adding antifreeze to the car?

Not adding antifreeze to the car can lead to engine overheating and damage, potentially causing accidents. Below is an introduction to antifreeze: 1. Antifreeze: Its full name is antifreeze coolant. It also serves to prevent boiling in summer, helping to avoid engine overheating and boiling over. 2. Notes on adding antifreeze: Do not mix antifreeze of different colors and specifications. When using antifreeze from different brands, try to completely drain the original antifreeze from the cooling system. Regardless of whether the temperature is high or low, antifreeze should be used for the efficiency and longevity of the cooling system. There is no theory that antifreeze is unnecessary in southern regions because winters are not cold.
18
4
Share

How Long Does the License Plate Registration Process Take?

License plate registration typically takes 1-2 days. Here are the relevant details: 1. Pre-registration preparation: Before going to the vehicle management office for registration, you must have the vehicle qualification certificate, purchase invoice, and compulsory traffic insurance policy (commercial insurance can be purchased after registration). Before processing the registration procedures at the vehicle management office, make 3 copies each of your ID card, vehicle qualification certificate, purchase invoice, and compulsory traffic insurance policy for backup. 2. Important notes: After purchasing a new car, there is no national regulation specifying how long you must complete the registration (license plate application). However, it is subject to restrictions from national environmental policies and changes in vehicle announcements.
5
1
Share

What is the method to clear fault codes?

Clearing fault codes involves the following steps: 1. Clean the throttle body; 2. Check whether the throttle pedal sensor's connector is loose and whether the wiring is aged or broken, then replace or repair as necessary. Fault codes typically indicate issues with the throttle body or throttle pedal position sensor. Precautions for cleaning the throttle body include: 1. Avoid using highly corrosive cleaning agents; 2. Be gentle during cleaning to prevent damage to the coating. The method for cleaning the throttle body is as follows: 1. Remove the intake hose to expose the throttle body; 2. Disconnect the negative terminal of the battery, turn off the ignition switch, straighten the throttle plate, spray a small amount of carburetor cleaner into the throttle body, and then wipe it clean with a polyester cloth or high-density non-woven fabric.
14
5
Share

Is the Orlando an SUV?

The Orlando is not an SUV. The Orlando is a compact sedan under the Chevrolet brand, with body dimensions of 4684mm in length, 1807mm in width, and 1628mm in height, a wheelbase of 2796mm, and a trunk capacity of 479 liters. The Orlando features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is powered by an Ecotec dual-injection turbocharged engine equipped with a Start-Stop intelligent system, delivering a maximum power of 120kW and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
3
3
Share

Will the car drift after four-wheel alignment?

After four-wheel alignment, the car will not drift. Four-wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and a certain level of reliability. The installation of the steering wheels, steering knuckles, and front axle of a car has a specific relative position, which is called front wheel alignment. Front wheel alignment includes four aspects: caster, kingpin inclination, camber, and toe-in. This applies to the two front steering wheels. Similarly, the rear wheels also have a relative installation position with the rear axle, known as rear wheel alignment. Rear wheel alignment includes camber and individual rear wheel toe-in. Together, front wheel alignment and rear wheel alignment are collectively referred to as four-wheel alignment.
16
2
Share

What is the Principle of Auto Hold?

Auto Hold system works by utilizing the extended functionality of the electronic parking brake (EPB) through the brake management system to control the four-wheel brakes. The Auto Hold system is a technological application that enables automatic parking brake functionality while the vehicle is in operation. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary rolling when the automatic electronic parking brake is engaged. The primary function of the Auto Hold feature is to prevent the vehicle from rolling backward, making it particularly useful on inclines and during frequent starts and stops. The Auto Hold system, together with the electronic parking brake, forms an intelligent brake control system that integrates temporary braking during driving with long-term parking braking after stopping, all achieved through electronic control for parking brake functionality.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.