···
Log in / Register

Will a new car have welding marks?

1Answers
SanKiara
07/25/2025, 09:14:17 AM

New cars may have welding marks. Reasons for welding marks: In cases where special materials are used, structures cannot be overlapped, or the overlapping thickness is too large for spot welding to be applicable, seam welding is employed. This type of welding results in a full and uniform seam appearance, and since the parts themselves are relatively thick, welding marks may become visible. Impact of welding marks: The presence of welding marks is a normal phenomenon. Generally, it does not cause discomfort while driving nor affect travel safety. However, it might slightly impact the aesthetic appeal, but since these marks are usually located at the bottom of the car, the overall effect is minimal.

Was this review help?
103
Share
More Q&A

Which country is the Porsche brand from?

The Porsche brand originates from Germany. Here is some relevant information about Porsche: 1. Porsche is globally renowned for producing high-performance sports cars. Its emblem adopts the coat of arms of Baden-Württemberg, the state where Stuttgart is located, using the black, red, and yellow colors of the German flag as the background. 2. The galloping horse in the center and the word 'Stuttgart' above reflect the region's heritage as a breeding ground for renowned horses since the 16th century. The antler patterns in the top left and bottom right corners indicate that the area was also a hunting ground. The yellow stripes in the top right and bottom left represent the color of ripe wheat ears, symbolizing fertile land and the happiness it brings to people. Red signifies human wisdom. The entire emblem showcases Porsche's glorious history and promising future.
118
Share

What Are the Differences Between the Envision and the Encore?

The differences between the Envision and the Encore can be summarized in the following 5 points: 1. Vehicle positioning is different: The Encore is a compact SUV, while the Envision is a midsize SUV. 2. Pricing varies: The Encore is priced between 140,000 to 190,000 RMB, while the Envision is expected to be priced between 250,000 to 350,000 RMB. 3. Powertrain differences: The 2019 Buick Envision National VI version comes in two models: The 20T model is equipped with a newly tuned 1.5T SIDI direct-injection turbocharged engine paired with an upgraded 7-speed DCG dual-clutch transmission, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 N·m. The 28T model continues to use a 2.0T SIDI direct-injection turbocharged engine, matched with a 9-speed automatic transmission, producing a maximum horsepower of 260 PS, a maximum power of 191 kW, and a maximum torque of 400 N·m. In contrast, the Encore is equipped with a 1.4T turbocharged engine, delivering a maximum power of 105 kW (143 PS) and a maximum torque of 205 N·m, paired with either a 6-speed manual or a 6-speed automatic transmission. 4. Different configurations: The Encore comes standard with Buick's next-generation eConnect intelligent connectivity technology, featuring the Baidu CarLife in-car system and intelligent voice recognition, while the Envision does not. 5. Exterior design differences: The Envision's front fascia does not use the bold lines seen on its larger siblings but instead features more rounded contours, whereas the Encore adopts Buick's signature winged grille design.
111
Share

Why is U-turn prohibited at railway crossings?

Reasons for prohibiting U-turns at railway crossings: Making a U-turn at a railway crossing can easily cause traffic accidents. According to relevant regulations, motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other dangerous sections of the road. Motor vehicles can make U-turns at locations without no U-turn or no left-turn signs or markings, but they must not obstruct the passage of other normally moving vehicles and pedestrians; at locations where U-turns are permitted and special U-turn traffic lights are installed, U-turns should be made during the green light. If there are no U-turn traffic lights but there are corresponding signs indicating U-turns during red or green lights, the U-turn should be made following the instructions of the signs.
120
Share

How to Replace Brake Fluid for Audi Q5?

Audi Q5 brake fluid replacement detailed steps are as follows: 1. First, open the car hood, locate the brake fluid reservoir, use a syringe to extract all the old brake fluid from the reservoir, and then add new brake fluid. During the extraction process, avoid splashing brake fluid on your body to prevent skin corrosion. It's crucial to completely remove air from the system during the brake fluid replacement, as air entering the brake pump or hydraulic lines can reduce braking performance and severely impact driving safety. It's recommended to use a clean, transparent tube for fluid transfer to monitor the expulsion of old fluid and check for air bubbles. Additionally, never mix different brands of brake fluid, as their formulations vary and mixing can significantly impair brake fluid performance. 2. During regular car maintenance, many people overlook the brake fluid. Over time, brake fluid absorbs moisture, lowering its boiling point and potentially causing brake failure, hence the necessity for timely replacement. 3. Generally, the brake fluid should be inspected every 10,000-20,000 kilometers and replaced every two years or 30,000-40,000 kilometers. In humid environments, the replacement interval should be shortened. For braking systems with special requirements, only specified brake fluid should be used. When replacing with new brake fluid, ensure the old fluid is thoroughly cleaned out before adding the new one. Moreover, avoid mixing engine oil, windshield washer fluid, or gasoline with brake fluid, as this can drastically reduce its effectiveness.
112
Share

What are the differences between the Mercedes-Benz E200 and E260?

Mercedes-Benz E200 and E260 differ in the following aspects: 1. Engine: The Mercedes-Benz E200 is equipped with a 2.0T 184 horsepower engine, while the E260 comes with a 1.5T 184 horsepower engine. 2. Top speed: The E200 can reach 235 km/h, whereas the E260 can reach 230 km/h. 3. Fuel consumption: The E200 averages 6.9L/100km, while the E260 averages 6.8L/100km. 4. Exterior differences: The rear badges are different, with one labeled E200 and the other E260.
101
Share

What to Do If Failing the Vision Test for Driver's License Renewal?

Failing the vision test for driver's license renewal means you cannot renew your license. You need to correct your vision and pass the medical examination before renewal. The vision standard for driver's license renewal is that the naked or corrected vision of both eyes must reach at least 4.9 on the logarithmic visual acuity chart. The full name of a driver's license is a motor vehicle driving license, which is a document issued by the government transportation department to individuals who qualify to drive, usually in the form of a card. To obtain a driver's license, one must meet the age requirements and pass the driving test. The driver's license typically specifies the types of motor vehicles the holder is allowed to drive, such as motorcycles, passenger cars, trucks, and buses.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.