Why is the VIN required for battery replacement?

Should You Warm Up Your Car in Winter?

Winter car warm-up is necessary; after prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine. Reasons for warming up the car in winter: 1. Lack of lubrication: After the car has been parked for an extended period, the engine oil flows back to the oil pan at the bottom of the engine. Therefore, when starting the engine after a long period of inactivity (such as overnight), the upper part of the engine is without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to circulate the oil to the parts of the engine that need lubrication the most, such as the pistons, connecting rods, and crankshaft. If you start the engine and drive immediately, as long as you don't accelerate aggressively and maintain low-speed operation, the effect is the same as idling. 2. Low fuel supply temperature: Before the engine reaches its operating temperature (approximately between 90-110 degrees Celsius), the fuel supply system, due to the low temperature, cannot effectively vaporize the gasoline completely. When the gasoline is not vaporized and remains in a wet, liquid state, it is difficult to ignite and start the engine. At this point, the choke valve comes into play, restricting some air from entering the cylinders to increase the gasoline/air mixture ratio and raising the engine speed to prevent stalling.

16

2

Share

What is an Oil Filter?

An oil filter is an oil cleaner, and here is some extended information: 1. The function of an oil filter is to filter the oil. The role of oil in a car's lubrication system mainly includes lubrication, rust prevention, sealing, cleaning, cooling, etc. 2. The purpose of the oil filter is to separate solid particles from the oil. Any car's lubrication system is equipped with an oil filter, but the models may vary. 3. Oil filters can be categorized by structure into replaceable, spin-on, and centrifugal types. Their arrangement in the system can be divided into full-flow and bypass types. 4. The filtering materials used in oil filters include filter paper, felt, metal mesh, and non-woven fabric.

1

3

Share

How to Use BMW Screen Sharing?

Download the vehicle interconnect APP. After installation, start the interconnect software on your phone and keep it running normally. Match and connect the phone to the car's Bluetooth, then enable the USB debugging function on your phone. Start the interconnect software on the car's system. Once the car system successfully synchronizes with the phone applications, the interconnect main page will be displayed. Use the phone mirroring function to achieve phone function mapping, enabling screen sharing. Additional information (BMW series include the following): As one of the three major German luxury brands, BMW not only holds a high market share and recognition in the domestic new car market but also boasts acceleration and high-speed performance that are among the best in the world automotive industry. The numeric series models include the 1 Series, 3 Series, 4 Series, 5 Series, 6 Series, and 7 Series. 1 Series: A compact car. 3 Series: A diverse success, a simple, sleek, and sporty premium sedan. 4 Series: Positioned between the 3 Series and 5 Series, offering a premium price. The new 4 Series' overall dynamic design will attract a younger consumer base and serve as a viable alternative to the high-end 6 Series Coupe. 5 Series: Personality, exemplar, dynamism—the BMW 5 Series: Wisdom forged through experience, the courage to challenge limits. 6 Series: The most elegant way is to embark on your journey in a BMW 6 Series. 7 Series: Offers stability and agility beyond other sedans.

2

4

Share

What are the benefits of torsion beam suspension?

Torsion beam suspension is the most common type of non-independent suspension in automobiles. The advantages of this suspension include simple structure, compact size, minimal space occupation, good reliability and durability, and low cost. Torsion beam suspension is a type of rear suspension that uses a torsion beam to balance the vertical movement of the left and right wheels, reducing vehicle sway and maintaining stability, making it a type of non-independent suspension. Below are the characteristics of torsion beam suspensions in various major models: 1. The SX4's torsion beam rear suspension also adopts a separated shock absorber and spring layout, with the rear drive half-shaft passing through the middle. Unlike the Luxgen 7, the SX4's torsion beam is designed offset from the wheel axis, with the torsion beam located above the differential, resulting in greater rear axle ground clearance. 2. The Luxgen 7's composite torsion beam rear suspension features a separated shock absorber and spring design, with the drive half-shaft passing between the shock spring and shock absorber to connect to the drive wheel. Meanwhile, the torsion beam is offset downward to avoid the differential and drive half-shaft, which results in relatively reduced rear axle ground clearance. The Luxgen's rear suspension torsion beam is designed close to the rear wheel axis, resembling a solid axle, providing excellent load-bearing capacity. 3. The Buick Encore's rear suspension uses a torsion beam suspension, with a layout similar to the overseas version of the SX4. The shock absorber and spring are arranged separately, with the half-shaft passing between them to connect to the rear drive wheel, and the torsion beam located above the differential and drive half-shaft.

20

3

Share

What does China 6b mean?

China 6b is a type of China 6 emission standard. The China 6 standard is divided into China 6a and China 6b standards, with the China 6b standard being more stringent. Most vehicles that comply with the China 6 standard meet the China 6b standard. Starting from July 1, 2019, China has already implemented the China 6 emission standard. With the increasing severity of global environmental pollution issues, countries around the world are introducing stricter emission standards, which is beneficial for protecting the Earth's environment. Stricter emission standards can regulate automakers, encouraging them to develop more environmentally friendly vehicles.

15

5

Share

Method to Reset the Maintenance Light on a Land Rover Evoque

The method to reset the maintenance light on a Land Rover Evoque is as follows: 1. Press the one-touch ignition button. 2. Use the function keys on the right side of the steering wheel, which include four directional keys and one OK key, to locate the vehicle information option on the dashboard. 3. Find the 'Latest Alert' option and press OK to enter. 4. Simultaneously press and hold the 'Down' key on the right side of the steering wheel and the 'i' button at the end of the turn signal stalk, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle to check if the reset was successful. If not, repeat the procedure.

20

1

Share

Why is the VIN required for battery replacement?

Should You Warm Up Your Car in Winter?

What is an Oil Filter?

How to Use BMW Screen Sharing?

What are the benefits of torsion beam suspension?

What does China 6b mean?

Method to Reset the Maintenance Light on a Land Rover Evoque

What should I do if my driver's license expires and hasn't been renewed?

What is the Mercedes-Benz Vito?

What's the Difference Between SUVs and Off-Road Vehicles?

Where is the ignition keyhole of the Roewe RX5?