···
Log in / Register

Why Is the Tire Pressure High in New Cars?

6Answers
MaciDella
09/04/2025, 04:40:32 AM

Reasons for high tire pressure in new cars: Tire damage causing deviation in the pressure of all four tires; High or low tire pressure leading to deviation in the pressure of all four tires; High tire temperature. Hazards of excessive tire pressure: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the tread center pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass on the road can easily penetrate the tire, causing internal cracks or blowouts. Hazards of insufficient tire pressure: Increases friction with the road surface, leading to higher fuel consumption; Makes the steering wheel heavy and prone to deviation, compromising driving safety; Increases movement of tire components, causing abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in blowouts; Increases tire deformation, leading to sidewall cracks and excessive heat from flexing, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.

Was this review help?
106
Share
VonCorey
09/16/2025, 10:40:30 PM

I noticed that the tire pressure of new cars is usually higher when they leave the factory. This is mainly because vehicles need to be parked for long periods or stacked during transportation. Higher tire pressure helps prevent deformation from prolonged pressure, avoiding flat spots or damage. After taking delivery of the car, we should immediately check the tire pressure gauge or visit a repair shop to adjust it to the manufacturer's recommended value, which is usually indicated on the door frame label or in the manual. When I drove my new car, I experienced a very stiff ride, but after reducing the pressure to the standard value, the driving comfort improved significantly, and the tire lifespan was extended. Regularly checking tire pressure is a good habit—it ensures driving safety, reduces wear, and improves fuel efficiency. Don’t forget to check the spare tire as well; it also requires maintenance. Don’t underestimate this small detail of tire pressure—it affects overall vehicle performance. After adjustment, you’ll notice reduced noise and more responsive handling.

Was this review help?
3
Share
Expand All
OGraham
10/30/2025, 11:09:42 PM

As a safety-conscious driver, I've noticed that new cars often come with higher tire pressure set by manufacturers to prevent tire damage during transportation, but this isn't ideal for daily driving. We should adjust the tire pressure to the recommended level before driving, otherwise it may lead to reduced handling performance, such as heavier steering or longer braking distances, increasing accident risks. When driving a new car, I make it a habit to check with a tire pressure gauge - an inexpensive yet practical tool that also helps prevent accelerated center tread wear. Proper tire pressure also improves fuel efficiency, saving money in the long run. Don't forget to consider environmental factors; cold weather may cause automatic pressure drops requiring timely adjustment. Maintaining correct tire pressure is a fundamental safety measure, especially crucial during highway driving.

Was this review help?
15
Share
Expand All
FernandoMarie
12/13/2025, 10:18:03 PM

In terms of car maintenance, it's common for new tires to have higher pressure to prevent deformation or flat spots during storage, making them suitable for long-term parking. I recommend adjusting the pressure to the manufacturer's suggested value either by yourself or with professional help as soon as you get the car. This value is usually indicated on the B-pillar label. Proper tire pressure ensures more even wear, extending the tire's lifespan by two to three years, and also improves ride comfort. Checking the pressure with a tire gauge is simple and inexpensive, but it helps prevent bigger issues like the risk of a blowout. Regular maintenance is a wise choice, especially during seasonal changes when tire pressure fluctuates significantly. Adjusting it ensures a more secure driving experience.

Was this review help?
11
Share
Expand All
VanElijah
02/02/2026, 11:17:57 PM

From an economic perspective, as a car owner, I've noticed that new cars often come with higher tire pressure as a manufacturer strategy to reduce transportation costs. Higher tire pressure decreases friction and saves fuel. However, when actually driving, it's essential to adjust it to the manual's specified value to prevent accelerated tire wear and increased replacement costs. My personal experience shows that after adjustment, fuel consumption improves by about 5% per 100 kilometers, and driving becomes smoother. Proper tire pressure also prevents blowouts or bumpy rides, enhancing efficiency. Developing a habit of using a tire pressure gauge for monthly checks is a simple step that can save significant money and avoid unexpected repair expenses. Cost considerations aren't just about fuel consumption; they're also about overall vehicle health and long-term usage.

Was this review help?
7
Share
Expand All
LaJayden
04/28/2026, 03:57:25 PM

From a family safety perspective, higher tire pressure in new cars during the factory stage prevents tire deformation during long-term parking. However, it should be adjusted lower when driving to ensure comfort. When traveling with children, I always make sure the tire pressure is appropriate, as excessive pressure increases bumpiness, making rear-seat children uncomfortable and potentially causing motion sickness. Adjusting to the recommended value is simple—either visit a gas station or do it yourself—and it significantly impacts overall handling safety, such as providing better wet-road traction. Maintaining ideal tire pressure helps prevent sudden failures, especially avoiding skidding risks at high speeds. For family vehicles, the focus is on smooth and safe operation, making regular tire pressure checks a crucial maintenance step for more secure and enjoyable journeys.

Was this review help?
20
Share
Expand All
More Q&A

What are the finger requirements for a C1 medical examination?

The finger requirements for a C1 medical examination are that both thumbs must be intact, and each hand must have at least three other fingers intact with normal finger movement function. The requirements for a driver's license medical examination are as follows: Motor vehicle drivers aged 70 and above (including 70 years old) should undergo an annual physical examination, while those under 70 years old are not required to do so. What is a C1 driver's license: A C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving scope of a C1 driver's license includes small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Application age: The minimum age requirement for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, reaction ability, etc.
113
Share

What does the six-year vehicle inspection exemption mean?

The six-year vehicle inspection exemption means that within six years from the date of vehicle registration, there is no need to go to the vehicle management office for an inspection. The following is a detailed introduction to the six-year inspection exemption: 1. Implementation date: On May 16, 2014, the Ministry of Public Security and the General Administration of Quality Supervision, Inspection and Quarantine jointly issued a document introducing 18 major reform measures, including a six-year inspection exemption for private cars and cross-regional vehicle inspections. 2. Notes: The exemption refers to exemption from "on-site testing". On-site testing refers to the inspection of nine items of the motor vehicle, including exhaust emissions, side slip, speedometer, axle weight, lights, noise, chassis, and braking.
112
Share

Where is the Ji O black license plate from?

Ji O black license plates are from Hebei Province, but they are not civilian license plates; they are used by the armed police. The license plate codes for Hebei Province are as follows: Ji A is Shijiazhuang, Ji B is Tangshan, Ji C is Qinhuangdao, Ji D is Handan, Ji E is Xingtai, Ji F is Baoding, Ji G is Zhangjiakou, Ji H is Chengde, Ji J is Cangzhou, Ji K is Handan, Ji L is Xingtai, Ji N is Baoding, Ji P is Zhangjiakou, Ji Q is Chengde, Ji R is Langfang, Ji S is Cangzhou, Ji T is Hengshui. License plates are used for numbering and information registration of vehicles. Their main function is to identify the region to which the vehicle belongs through the license plate, and to trace the owner and registration information of the vehicle based on the license plate.
119
Share

How many months can a vehicle be overdue for inspection?

Vehicle inspection can be overdue for up to three months. If the delay is within three months, you can simply make up for it and will receive a verbal warning without a fine; if the vehicle inspection is overdue for more than three months but less than two years, a fine will be imposed. Vehicle annual inspection refers to the annual or biennial safety inspection of the vehicle, including a comprehensive check of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, and more. The items required for vehicle annual inspection include: 1. Original vehicle license and road and bridge card; 2. Copy of compulsory traffic insurance; 3. First black copy of road and bridge ticket; 4. Owner's ID card and a copy; 5. The vehicle itself.
109
Share

Where is the radiator cap located on a Prado?

Prado radiator cap is located on the radiator. You can open the hood and locate the radiator when the engine has completely cooled down. There is usually a filler expansion tank (attached reservoir) or a cap marked with coolant filling instructions. Opening this cap allows you to add water. The car radiator generally refers to the automobile heat exchanger, which is part of the vehicle's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The Prado is a mid-to-large 5-door 7-seat SUV produced by FAW Toyota, with dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, featuring a wheelbase of 2790mm and equipped with a 6-speed automatic transmission.
105
Share

What are the requirements for a driver's license photo?

Requirements for a driver's license photo: 1. The background color should be white, without wearing a uniform, the portrait should be clear, with rich layers, natural expression, and no obvious distortion; 2. The photo size should be 32mm x 22mm, with a head width of 14mm to 16mm and a head length of 19mm to 22mm; 3. The photo can be adhesive or digitally printed; 4. The shooting location should be the vehicle management office or a photo studio with a formal business license; 5. Applicants applying for a motor vehicle driver's license or temporary motor vehicle driving permit need a front-facing, bareheaded, color, single-person half-length ID photo taken within the last 6 months.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.