Why is the fuel consumption of the Wuling Capgemini so high?

1 Answers
EdenMarie
07/29/25 9:19pm
The specific fuel consumption largely depends on the actual driving habits and road conditions of the owner. Below is an introduction to the Wuling Capgemini: Exterior: The front face of the Wuling Capgemini features a Falcon Wing Matrix grille design, with a wide front grille paired with the Wuling Global Silver Badge logo. The grille interior is horizontally traversed by multiple chrome-plated elements. The Wuling Capgemini adopts a split-type headlight design, with high and low beams arranged in an up-down split configuration, enhancing the layered appearance of the front face. Additionally, the LED daytime running lights provide a three-dimensional light source. Interior: The cabin design of the Wuling Capgemini draws inspiration from structuralism in architecture, with dynamic curves connecting the overall interior structure, achieving a balance between aesthetics and practicality.
Was this review help?
12
4
Share
More Forum Discussions

How to Clean Tar Spots on a Car?

Methods for cleaning tar spots on a car: 1. Specialized automotive tar remover: Tar removers are commonly used products in car detailing, mainly for cleaning organic hydrocarbons such as tar and pitch; 2. Organic solvent cleaning: If scrubbing is difficult to remove, organic solvents can be used, but be sure to choose solvents that do not dissolve the paint, such as alcohol-based or benzene-based solvents. The main component of tar is hydrocarbons, which are insoluble in water but soluble in carbon disulfide. Therefore, washing the car won’t remove tar spots from the paint, and rubbing hard with a towel is not only ineffective but also risks scratching the paint.
15
0
Share

Is the Car's Recirculation Light On or Off?

When the car's recirculation light is on, it indicates that the recirculation mode is activated. The primary function of recirculation is to promptly and effectively prevent external dust and harmful gases from entering the vehicle. For example, when driving through areas with smoke, dust, unpleasant odors, or in heavy traffic, it blocks harmful exhaust emissions from vehicles ahead. The role of the external circulation mode is to replenish fresh air, while recirculation mode isolates the vehicle from outside polluted air. In recirculation mode, the airflow passage between the inside and outside of the vehicle is closed. Without the fan turned on, there is no airflow circulation. When the fan is on, the airflow drawn in comes solely from inside the vehicle, creating an internal airflow circulation within the car.
8
3
Share

How to Turn on the Vehicle's External Air Circulation?

To activate the external air circulation in a vehicle, you can directly press the button on the central control panel. The symbol for the external circulation button is an arrow pointing from the outside of the front windshield into the car, while the internal circulation button symbol is an arrow making a circle inside the car. Generally, external circulation can be turned on when driving on highways, while internal circulation is suitable for city roads. The external air circulation draws outside air into the car, similar to opening the window for ventilation, but it filters out impurities and harmful gases from the external air, preventing them from entering the cabin and polluting the environment. Internal circulation, on the other hand, recirculates the air inside the cabin. In harsh conditions such as traffic jams or sandstorms, internal circulation helps maintain airflow inside the car, prevents stuffiness, and blocks external pollutants and harmful gases from entering.
13
0
Share

What is the tire model of the Tayron?

The tire model and size of the Tayron are mainly divided into three categories: 1. The tire model and size for the Tayron Comfort version is 215/65/R17; 2. The Luxury and Premium versions use 235/55/R18 tires; 3. The R-Line and Flagship versions are equipped with 235/50R19 tires. Below is relevant information about car tires: 1. When the tire surface wears down to the position of the triangular indicator, it should be replaced promptly to prevent safety hazards. 2. After replacing or repairing tires, it's essential to perform a four-wheel alignment and dynamic balancing to prevent abnormal vibrations during high-speed driving. Additionally, avoid driving at high speeds over potholes to prevent tire blowouts.
16
2
Share

What Causes the Noise After Engine Shutdown?

Engine noise after shutdown is a normal phenomenon, designed to prevent the engine from "seizing up" due to rapid cooling after stopping. Relevant explanations are as follows: 1. After driving for a period, various components of the engine reach high temperatures. Upon stopping, moving parts inside the engine, such as cylinders and piston rings, crankshafts and connecting rods, may "stick" together due to the high temperatures. This can lead to tightness during the next startup, commonly referred to as "cylinder seizure or bearing failure." 2. After prolonged driving, when you need to park, it's advisable to let the car idle in place for a few minutes to allow the engine temperature to decrease naturally before shutting it off. If the vehicle is equipped with an automatic cooling function, meaning that if the engine temperature is too high after stopping, it will automatically activate the fan to continue cooling the engine. The fan will stop automatically once the engine temperature drops to a reasonable level.
19
5
Share

What kind of fuel does the Jaguar XJL use?

Jaguar XJL uses 95 octane gasoline. The type of oil used in a car should be determined based on the car's performance and the type of engine it has. It is unnecessary to use high-grade oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Below is some relevant information about engine oil: 1. Engine oil is referred to as the lifeblood of the engine. Without oil, the engine cannot operate. During engine operation, the oil forms a thin film on the surfaces of various engine components, preventing direct contact and friction between them. In fact, engine oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. 2. Over time, the performance of engine oil degrades, so it needs to be replaced regularly. Failure to change the oil for an extended period can accelerate engine wear. It is recommended to change the engine oil regularly during normal vehicle use and to replace the oil filter every time the oil is changed.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.