···
Log in / Register

Why does the new Baojun 730 make abnormal noises when turning the steering wheel back and forth?

6Answers
McPeyton
07/29/2025, 02:48:57 PM

Steering wheel abnormal noises may be caused by insufficient lubrication of the steering column, low power steering fluid, issues with the universal joint, or damage to the plane bearing. Steering wheel principle: Many vehicles now have vacuum assist, which only reduces the driver's control effort but does not change the force on the steering gear itself. Therefore, an effective way to reduce steering wheel wear is to minimize the load on the steering wheel during operation. Safety hazards caused by aging: Car enthusiasts should develop the habit of turning the steering wheel only after the wheels start moving. This reduces the friction resistance between the tires and the ground, lessens the excessive load on the steering gear and the excessive wear of the steering linkage system, which can cause abnormal noises when turning the steering wheel. Long-term stationary steering: This not only places a heavy load on the steering gear but also accelerates the wear on the tire surface, reducing the tire's service life. The method to change this habit is: Quickly turn the steering wheel when the wheels are slightly moving to achieve the purpose of control.

Was this review help?
105
Share
DiElliana
08/14/2025, 08:24:46 AM

I've been driving my Baojun 730 for over a year, and sometimes I hear squeaking or creaking noises when turning the steering wheel back and forth, which is quite common in new cars. The possible reasons are, first, insufficient lubrication in the steering system. Some parts might not have been fully prepared when the car left the factory, such as insufficient grease on the universal joints or steering shafts, causing friction noises. Also, if the suspension bolts weren't tightened properly during assembly, they can loosen and create noise when turning. I suggest you don't take it lightly. New cars come with a warranty period, so it's best to take it to a 4S shop and have the mechanics check the electrical and mechanical parts with their tools to address the issue promptly and prevent small problems from becoming big ones. Ignoring it might affect steering feel or even tire wear, which isn't worth it. I learned this the hard way myself—fixing it early saves a lot of hassle, especially since safety comes first.

Was this review help?
11
Share
Expand All
VonWeston
10/14/2025, 04:18:25 AM

With over ten years of car repair experience, I've encountered numerous cases of steering system noises in new vehicles. For models like the Baojun 730, such noises often originate from friction or assembly issues in the steering system—for instance, insufficient lubrication in the universal joint of the steering column can cause creaking sounds during the break-in period when parts haven't fully settled. It might also relate to shock absorbers or loose chassis bolts; if not properly tightened during assembly, repeated steering can lead to wobbling. Don't panic—first, try inspecting the tires and suspension yourself. If the noise is particularly noticeable during low-speed turns, promptly visit a professional workshop for diagnosis—they have specialized tools to pinpoint the root cause. These are common teething issues with new cars, and repairs are typically covered under warranty. Delaying repairs could risk damaging the electronic power steering system, potentially increasing repair costs.

Was this review help?
12
Share
Expand All
MadelineMarie
11/27/2025, 09:25:42 PM

I sometimes hear abnormal noises from the steering of my new Baojun 730, probably due to insufficient assembly details of the new car. The issue might be caused by inadequate lubrication of the steering shaft or loose suspension screws. It's recommended to manually check the chassis area when parking to see if there's any noticeable shaking or source of noise. Don't rush to spend money; most problems can be covered under the new car warranty, so contacting the dealer for inspection is the safest option. Regular maintenance can prevent similar situations, ensuring the screws and lubricant are in good condition. If ignored, the abnormal noise may worsen and affect driving stability.

Was this review help?
7
Share
Expand All
StNadia
01/17/2026, 10:49:28 PM

I just picked up my Baojun 730, and sometimes the steering makes annoying creaking noises. Common causes of abnormal noises in new cars are break-in issues with the steering system, improperly treated universal joints or power steering pumps, leading to friction sounds. It could also be due to unstable installation of suspension components or loose screws causing shaking during turns. This is where the advantage of new car warranty comes in—promptly take it to the 4S shop for inspection and adjustment to prevent more serious issues like power steering failure. If the noise worsens while driving, stop using the car immediately—safety comes first.

Was this review help?
15
Share
Expand All
VanAlexander
04/14/2026, 12:32:22 AM

During my test drive of the Baojun 730, I noticed a sound when turning the steering wheel back and forth, which is uncommon but possible in new cars. The abnormal noise may originate from the steering mechanism or chassis assembly, such as friction at the shock absorber connection points or loose screws. Prolonged exposure to this issue can accelerate wear. It's recommended to have the technician focus on this during the first maintenance service for the new car, and pay attention daily to whether the noise changes with speed. If left unaddressed, steering sensitivity and vehicle balance may be affected, posing a threat to driving safety. Although the Baojun brand is reliable, it's best to address minor factory defects early.

Was this review help?
2
Share
Expand All
More Q&A

How often should Volkswagen's full synthetic oil be changed?

Volkswagen's full synthetic oil can typically be changed every 10,000-12,000 kilometers or every six months. If the driving environment is dusty, the temperature is relatively low, or the car is frequently used for short trips, it is recommended to shorten the oil change interval to ensure smooth engine operation. Method for changing oil in Volkswagen cars: Use a jack to lift the Volkswagen car, locate and loosen the drain plug to drain the oil; unscrew the oil filter and place a container beneath it; replace with a new oil filter and add new oil. Meaning of oil grades: The 'W' stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating a lower usable environmental temperature and better engine protection during cold starts. The number after 'W' indicates the oil's high-temperature resistance; the larger the number, the better the oil's protective performance under high temperatures. Classification of engine oils: Conventional mineral oil, semi-synthetic oil, and full synthetic oil. Mineral oil is a commonly used lubricant on the market, derived from useful substances during petroleum refining. Semi-synthetic oil uses semi-synthetic base oil, a product purified from mineral oil through hydrocracking technology. Full synthetic oil is the highest-grade oil among engine oils.
115
Share

How to Turn Off Anti-Skid on Haval M6?

It can be turned off individually. Except for manual transmissions that are not equipped with a Dynamic Stability Control System, automatic transmissions are all equipped with a Dynamic Stability Control System. It might be due to a failure in the brake master cylinder, causing no pressure inside the brake system. Press the one-button start key to start the engine. A bunch of icons will appear in the middle of the dashboard and will automatically turn off after a few seconds. This process is the car's self-check procedure. Press the button to turn off the anti-skid feature on the Haval M6.
106
Share

How to Replace the Key Battery for an 8th-Generation Camry?

First, remove the mechanical key, then stand the key upright. Remove the key cover, and wrap the head of a flathead screwdriver with a cloth to avoid damaging the key. Use a small flathead screwdriver to remove the depleted battery. The battery might be located on the cover; removing the electronic key's template will reveal the installation position. Insert the newly prepared battery, ensuring the "+" terminal is facing upwards. After installing the battery, reassemble the key and confirm that the key functions normally to complete the process.
112
Share

At what water level should a car no longer be driven?

Theoretically, as long as water does not submerge the air intake, it will not affect the engine. However, there are too many unpredictable factors. For example, when another vehicle passes by, it may create waves that could splash water into the air intake. Additionally, it is essential to drive slowly through water, and the underwater environment is unknown even if the water surface appears calm. If the engine stalls while wading through water, never attempt to restart it! The following three height references can help determine safe wading conditions: 1. Exhaust pipe height: Safe wading height. During actual driving, as long as the engine is running, the exhaust pipe continuously emits exhaust gases, which prevent water from entering the pipe. Therefore, the primary concern when wading is not the exhaust pipe but the air intake. 2. Above half-wheel height: Risk of water entering the vehicle. Modern cars are equipped with numerous electronic components and sensors. If the water level exceeds half the wheel height, water may seep into the vehicle. 3. Air intake height: Maximum wading height. The air intake height is the most critical indicator of a vehicle's wading capability. If water enters the air intake, it can cause the engine to stall, and in severe cases, water may be sucked into the engine, leading to permanent damage. Therefore, if the water reaches this level, the car must not be driven further.
113
Share

What are the dangers of coasting in neutral gear?

When coasting in neutral gear, the transmission is in a neutral working state, the driving wheels will lose driving force, and the connection between the engine and the driving wheels will be lost, resulting in the car relying solely on its own inertia to coast forward, which can easily lead to traffic accidents. The following is a detailed introduction about car gears: 1. Speed aspect: The speed corresponding to first gear is 0-5km/h. The speed corresponding to second gear is 5-20km/h, the speed corresponding to third gear is 20-40km/h, the speed corresponding to fourth gear is 40-60km/h, and the speed corresponding to fifth gear is 60-100km/h. 2. Gear shifting timing: The general gear shifting timing for cars is when the engine speed is 2000r/min, and it should not exceed 2500r/min. For some high-displacement and high-power engines, gear shifting can be done around 3000r/min.
103
Share

What to Do When the Motorcycle Fuel Tank Cap Doesn't Seal Properly?

If the motorcycle fuel tank cap doesn't seal properly, replacing the sealing gasket or using a thicker one can solve the issue. Here is some relevant information: 1. Develop good vehicle maintenance and regular inspection habits: Clean or replace the air filter on time to ensure the engine's air-fuel ratio remains normal. Do not rigidly follow the cleaning or replacement cycle specified in your motorcycle's maintenance manual, as the required frequency may vary depending on the region and usage environment. 2. Regular maintenance: Regularly maintain the fuel supply system (carburetor or fuel injection), clean the spark plug frequently, and replace it periodically. It is recommended to have these cleaning and tuning tasks performed at a professional repair shop.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.