···
Log in / Register

Why Does the Kia Soul Have High Fuel Consumption?

6Answers
HaileyRose
09/03/2025, 10:44:42 PM

Kia Soul has high fuel consumption for the following reasons: 1. Insufficient tire inflation: If you notice that the vehicle's coasting distance is significantly reduced during driving, you should check whether the tire pressure meets the standard. Insufficient tire inflation will also increase fuel consumption. It is necessary to inflate the tires properly in a timely manner. 2. Severe tire wear: Check the degree of tire wear. If the tires are severely worn, slipping will frequently occur, increasing fuel consumption. Replace the tires with new ones when necessary. 3. Damaged thermostat: When the car's temperature control switch and thermostat are damaged, fuel consumption will increase. The damage to the temperature control switch and thermostat will lower the water temperature, preventing the carburetor from working properly, leading to poor gasoline atomization and a significant increase in fuel consumption. Faulty parts should be replaced promptly.

Was this review help?
106
Share
DeJoanna
09/15/2025, 11:56:59 PM

I've been driving a Kia Soul for several years and found that the high fuel consumption is mainly related to several factors. Its boxy body design creates significant wind resistance at highway speeds, like pushing a large board forward, which naturally consumes more fuel. The engine's power isn't particularly high, but it struggles even more in stop-and-go city traffic, especially during congestion with frequent starts and stops, causing fuel consumption to spike. Additionally, the car's weight isn't light, and some drivers have aggressive habits like hard acceleration and sudden braking, which worsen fuel efficiency. Regular maintenance can help somewhat, such as checking tire pressure and whether the air filter is clogged, but these minor issues are easily overlooked, and when they accumulate, fuel consumption increases. Personally, my fuel consumption is decent during highway cruising but skyrockets in urban areas, which seems to be a common issue with this model. I'd recommend paying more attention to driving habits and vehicle maintenance to mitigate it.

Was this review help?
17
Share
Expand All
LouisLynn
10/30/2025, 12:32:18 AM

As a Kia owner who frequently repairs cars, there are many reasons for the Soul's high fuel consumption. On one hand, the car itself is relatively heavy, and the engine tuning is not very efficient at low speeds, leading to higher daily commuting fuel consumption. Driving habits also have a significant impact; bad habits like sudden acceleration or hard braking can noticeably reduce the mileage per tank of fuel. Maintenance is another issue—dirty air filters not being replaced in time or old engine oil increasing the engine's burden can both drive up fuel consumption. City traffic congestion is the worst, as frequent stops and starts prevent the engine from optimizing combustion, naturally causing fuel consumption to soar. Then there's the issue of tires—low tire pressure makes the wheels harder to turn, requiring more fuel. I recommend developing smooth driving habits and maintaining proper tire pressure; fuel consumption will be better on long trips, but overall, this model is quite fuel-thirsty in urban environments.

Was this review help?
4
Share
Expand All
AlejandroLynn
12/12/2025, 11:40:25 PM

The relatively high fuel consumption of the Kia Soul can be attributed to several common factors. Its boxy body design creates significant wind resistance, especially at high speeds, leading to increased fuel consumption. The vehicle's weight is also not light, making it harder for the small engine to accelerate efficiently. Neglected maintenance, such as clogged air filters or aged spark plugs, can reduce engine efficiency and raise fuel usage. Additionally, aggressive driving habits like frequent acceleration or hard braking can further increase fuel consumption. In summary, regular checks on these details can help better control fuel consumption.

Was this review help?
6
Share
Expand All
DelLucia
02/02/2026, 12:45:16 AM

I drive a Kia Soul to commute, often stuck in city traffic, and its fuel consumption is noticeably higher than other cars. Its boxy shape creates significant wind resistance at high speeds, but the main culprit is urban congestion, with frequent starts and stops preventing the engine from running efficiently. Weather also plays a role—longer warm-up times in cold winters lead to faster fuel consumption. Low tire pressure or aging vehicle components worsen fuel economy. Smoother driving habits can help, but overall, this car's design is inherently fuel-thirsty.

Was this review help?
12
Share
Expand All
DiJeremiah
04/27/2026, 05:37:41 PM

There are multiple reasons for the high fuel consumption of the Kia Soul. Its boxy shape results in significant wind resistance, and the fuel gauge drops noticeably when driving at high speeds due to wind drag. The vehicle has moderate weight but an underpowered engine, which is particularly inefficient and fuel-thirsty at low speeds. Neglected maintenance, such as dirty air filters or expired engine oil, increases engine load and raises fuel consumption. Aggressive driving habits like sudden acceleration also contribute to higher fuel usage. Frequent stop-and-go traffic in urban areas is the most fuel-intensive scenario, as the engine cannot operate optimally. Regular maintenance and smoother driving habits can help slightly improve fuel efficiency.

Was this review help?
10
Share
Expand All
More Q&A

How to Adjust the Valves of a Five-Cylinder Engine?

Five-cylinder engine valve adjustment method: First, slightly loosen the lock nut on the rocker arm, then use a screwdriver to turn the adjustment screw as needed—turning it downward reduces the clearance, while turning it upward increases the clearance. Adjust until the rocker arm and valve are in contact with the feeler gauge but can still move slightly. Then, hold the adjustment screw in place with the screwdriver and tighten the lock nut. Next, move the feeler gauge and rotate the crankshaft for rechecking until all valve clearances are correctly set. Car valves, also known as throttle valves, are responsible for delivering fuel into the engine and expelling exhaust gases. Traditional engines have only one intake valve and one exhaust valve per cylinder. This design is relatively simple, easy to maintain, and performs well at low speeds. However, its drawback is difficulty in increasing power, especially at high speeds where the air intake efficiency is low and performance is weaker. To improve intake and exhaust efficiency, multi-valve technology is now commonly adopted.
101
Share

Can 0w-40 engine oil be used in summer?

Can 0w-40 engine oil be used in summer? The answer is yes. Here are the methods and precautions for selecting engine oil models: Methods for selecting engine oil models for cars: Choose based on engine oil produced by well-known brands or large manufacturers; select according to the API grade of the engine oil; choose the appropriate engine oil according to the season. It is recommended to use 5W30 engine oil in winter, 5W40 can be used all year round in most regions, and 10W40 engine oil is recommended for use in summer. Precautions for using engine oil: Select engine oil according to the requirements of the engine. Do not use high-grade engine oil on lower-grade engines, nor use low-grade engine oil on high-grade engines. Choose engine oil that matches the engine; the oil level should be slightly below the mark on the dipstick, and do not overfill.
115
Share

What does the SOS light on the ceiling of the Audi Q5 mean?

The SOS light on the ceiling of the Audi Q5 is the engine fault light. It mainly lights up under the following circumstances: overheating of the dry dual-clutch transmission clutch; intervention or malfunction of the fuel cut-off system; parking sensor failure; external light bulb failure; engine oil pressure sensor failure, etc. The reasons for the SOS light on the Audi Q5L are as follows: There is a fault in the wiring system. Poor combustion state, poor engine combustion state is the main reason for the SOS engine fault light to come on. The method to turn off the SOS light on the ceiling of the Audi Q5 is as follows: Press the SOS switch button on the car once more to turn it off. If the combustion state is poor, you can try pressing the SOS button, turning off the engine, and then turning it on again.
108
Share

What does the yellow exclamation mark on the BYD dashboard indicate?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many dashboard indicator lights with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and windshield wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor malfunction, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a problem with the transmission or that the transmission fluid is below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors—yellow and red—to indicate different levels of severity: Yellow indicates a fault in the corresponding system, but the issue is not very severe. Reduce speed and proceed to a repair shop to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable risks to the vehicle and personal safety. Note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and to eliminate safety hazards.
101
Share

How to Change the Car Mileage Display from Miles to Kilometers?

The car mileage display cannot be changed from miles to kilometers. More information about the car odometer is as follows: 1. The car odometer indicates the speed of the car, measured in km/h (kilometers per hour). The car odometer actually consists of two meters: one is the speedometer, and the other is the odometer. The car odometer is generally located directly in front of the driver's position. 2. The car odometer also includes two LCD digital display windows connected to the same signal source, which respectively accumulate the trip mileage and the total mileage. The trip mileage usually has four digits for short-term counting and can be reset; the total mileage has six digits and cannot be reset.
118
Share

Which is for cooling, HI or LO on a car?

LO is for cooling. Here are the details: LO is the abbreviation of the English word 'LOW,' meaning 'low.' Therefore, when the car's air conditioning panel displays LO, it indicates that the air conditioning is in the lowest temperature cooling state, and the vehicle's air conditioning system is working at full capacity to cool. On the other hand, HI is the abbreviation of the English word 'HIGH,' meaning 'high.' When the air conditioning panel displays HI, it means the air conditioning is working at full capacity to heat, typically at 30 degrees Celsius. In this state, the air conditioning transfers heat from the engine coolant into the car's interior. Of course, if the vehicle is in a cold state, heating may be affected, but once the water temperature rises, heating will return to normal.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.