How to replace the air filter of the new Tiida?

[LeColeman]

The method to replace the air filter of the new Tiida: First, remove the external screws, then take off the bottom panel under the glove compartment by pulling it firmly. When reinstalling, make sure the two black objects align with the small clips under the glove compartment. After removing the old filter, replace it with a new one and reassemble everything in reverse order. The new Tiida is a compact car launched by Dongfeng Nissan, with dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90kw.

[VonGideon]

As a driver with over 20 years of experience, I often change the air filter myself, especially for cars like the new Tiida. The first step is to open the hood and locate the air filter box, usually near the engine—it's a black plastic casing secured with clips or small screws. I release the clips by hand, gently lift the cover, and remove the old filter—a dirty one can restrict the engine's 'breathing,' leading to increased fuel consumption or reduced power. Clean out any dust inside the box, insert the new filter, and make sure the arrow on it aligns with the airflow direction to avoid performance issues from incorrect installation. After closing the cover, ensure all clips are securely fastened to prevent dust from entering. Finally, start the engine to check if it runs smoothly. I recommend replacing it every six months or 10,000 kilometers—it saves fuel, extends engine life, and costs very little compared to shop visits. Wear gloves to avoid getting dirty; just a screwdriver is needed, and even beginners can learn this easily.

[OAngelina]

First time changing the air filter for my new Tiida by myself, I was a bit nervous, but following the online tutorial step by step made it quite simple. First, I popped open the hood and immediately recognized the square filter housing on the left side of the engine. Gently released the plastic clips on the cover - no need to yank hard to avoid damage. When I pulled out the old filter, it was completely covered in dust and spots, no wonder the car felt sluggish recently. Wiped the inner walls clean with a rag, then inserted the new filter following the arrow indicator, making sure it aligned perfectly. When closing the cover, pressed each clip firmly until hearing the satisfying click. The whole process took about ten minutes - saved repair shop fees and learned a handy skill. Recommend fellow drivers check regularly, like replacing every 8,000km or 6 months. A dirty filter makes the engine suck in more dust and increases fuel consumption. Only basic screwdrivers are needed, and keeping a spare filter in the car ensures timely replacement.

[MarleyDella]

I believe a safe air filter replacement requires thorough preparation. After turning off and shutting down the vehicle, open the hood and locate the filter housing of the new Tiida, typically in the left engine compartment. Carefully remove the old filter by releasing the housing clips, inspecting it for damage to prevent debris entry. Clean the empty housing before installing the new filter, ensuring the directional arrow alignment is crucial to avoid potential engine malfunctions. Avoid excessive force during the process, maintain housing cleanliness, and perform regular replacements to prevent vehicle performance degradation. After replacement, start the engine to verify normal operation.

[AdrielLynn]

I prefer changing the air filter myself—it's quite simple and practical for models like the new Tiida. After opening the hood, locate the filter housing secured by clips, then pry it open by hand to remove the old filter. Clean any dust inside the housing, and when installing the new filter, ensure the arrow points in the airflow direction—buying the correct model saves hassle. A basic screwdriver is the only tool needed, avoiding unnecessary shop expenses. After completion, start the engine to confirm normal operation. Recommended replacement every 10,000 km to maintain engine health and improve fuel efficiency. The whole process takes just 10 minutes—even beginners can master it easily.

[JulietteAnn]

Changing the air filter is routine maintenance for me. On the new Tiida, first open the hood and locate the plastic box. Release the clips to remove the dirty filter, clean the empty housing, then install the new one—make sure the directional arrow aligns with the airflow to avoid mistakes. Seal it tightly without gaps to prevent dust ingress. Regularly replacing the filter reduces engine wear, saving fuel and being eco-friendly. It's recommended to check every six months. DIY is simple and efficient—just use a household screwdriver, with minimal risk, ensuring long-term stable vehicle condition.