
Binyue requires 6 liters of engine oil because its oil tank capacity can accommodate 6L. When adding engine oil, it is essential to ensure the oil level remains between the min and max marks on the dipstick. The oil level must not fall below the min mark or exceed the max mark. If it's below min, it may cause insufficient lubrication, accelerating engine wear. If it exceeds max, it will increase engine operating resistance, leading to reduced power and higher fuel consumption. Below are the functions of engine oil: 1. Friction reduction: A sufficiently thick oil film separates the surfaces of relatively sliding components, thereby reducing wear. 2. Sealing: Engine oil forms a seal between piston rings and pistons, minimizing gas leakage and preventing external contaminants from entering. 3. Rust prevention: Lubricating oil adheres to component surfaces, protecting them from contact with water, air, acidic substances, and harmful gases. 4. Cushioning: When cylinder pressure rises sharply, suddenly intensifying the load on pistons, piston rings, connecting rods, and crankshaft bearings, the lubricated bearing transmission cushions the impact load. 5. Cleaning: High-quality engine oil circulates carbon deposits, sludge, and worn metal particles back to the oil tank, flushing away contaminants generated on component surfaces through oil flow.

As an average car owner, I've driven a 2019 Binyue 1.0T automatic transmission model. The manual specifies adding 6 liters of oil during an oil change, primarily because the turbocharged engine design requires a larger oil volume for cooling and lubrication. Otherwise, the engine is prone to overheating and damage under high temperatures. In daily driving, frequent stop-and-go city traffic increases oil temperature, and 6 liters ensures comprehensive oil film coverage, reducing piston and bearing wear. Once, I only added 5 liters during maintenance, and during high-speed driving, the engine noise became noticeably louder, with a warning light appearing on the dashboard. The issue stabilized only after topping up the oil. I recommend regularly checking the oil level with the dipstick to avoid problems caused by insufficient oil or abnormal oil pressure from overfilling. Choosing full synthetic oil is more appropriate, and changing it every 5,000 kilometers or six months can extend engine life.

As a seasoned car enthusiast who has tinkered with many engines, why does the Binyue's 1.5T engine require 6 liters of oil? The direct injection technology and compact crankcase create a larger oil chamber, ensuring even cooling during high-speed operation. During maintenance, I always use synthetic oil with the appropriate viscosity to maintain stable oil pressure. Consistently failing to meet the required oil level, such as insufficient oil, increases engine friction, accelerates oil pump wear, and can lead to oil burning issues as the car ages. In repair cases, I've seen tragedies like timing chain skipping caused by insufficient oil. It's recommended to check the oil temperature gauge after topping up and test driving – under normal operating conditions, the engine runs smoothly and lasts longer.

I use the new Binyue to drive my kids to and from school, and noticed the manual specifies 6 liters of oil. The technician explained that the engine's high efficiency requires extra lubrication to prevent overheating. A small tip is that regular oil changes can improve acceleration response, and having the correct oil level ensures safety. For example, on slippery rainy roads, a stable engine is reliable. During simple , using an automatic oil drain tool makes it easy to add the right amount.

Three years of using the Bin Yue have taught me that adding 6 liters of oil stems from engine design optimization, with sufficient oil reducing high-speed wear. In practice, accurate oil filling can lower fuel consumption, extend vehicle component lifespan, and make city commutes more worry-free. Developing the habit of checking the dipstick during helps minimize oil leakage issues.

A 6-liter oil change for the Binyue during road trips not only protects the engine but also reduces noise and vibration. Economically, the right amount of oil saves on costs, while environmentally, choosing low-emission oil with optimized quantity minimizes carbon footprint. After refueling, the engine runs smoothly, making long drives less tiring.


