Why Do Driving Schools Need ID Cards?

2 Answers
StAllison
07/28/25 8:43pm
When applying for a driver's license, your ID card needs to be kept at the driving school for about a week. The purpose is to use the original ID card to register the student's driving information. Here are some considerations for applying for a driver's license: 1. Check if the driving school is legitimate: Before enrolling, make sure to verify whether the driving school you want to join is legitimate, whether it is a shady institution, or if it is on the verge of closing down. You can check and judge through the school's office environment, enrollment process, or by consulting the local traffic management center. 2. Try to choose a well-known driving school: Well-known driving schools generally excel in instructor qualifications, service quality, complaint handling, and instructor replacement compared to average driving schools. 3. Inspect the training site in advance: A good training site is crucial for practice, especially for the second subject (parking and maneuvering). Some good driving schools have training sites identical to the test centers, while some lower-quality schools may have less formal training sites.
Was this review help?
2
0
Share
GiselleRose
08/12/25 1:28am
Driving schools require ID cards primarily for identity verification and age confirmation procedures. As someone who has long been involved with driving schools, I deeply understand this. Driving schools must confirm the identity of enrolled students to prevent impersonation; at the same time, they need to verify that students meet the legal age requirement, typically 18 years old, to qualify for driving lessons. The law mandates that driving schools maintain complete records of student information, from enrollment to obtaining a driver's license, which is used for archiving and subsequent exam applications. Failure to verify ID cards could pose safety risks, such as underage individuals taking lessons or fraudulent activities, compromising training quality. Driving schools use ID card information to connect with systems that automatically log training hours, streamlining the process and making it more standardized. I've also seen driving schools use this data to resolve minor disputes among students, such as quickly verifying training hours in case of disputes. Overall, an ID card is not just a compliance requirement but a crucial step in protecting students' own interests.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to Pass the Inspection Line for 4WD Vehicle Annual Inspection?

Methods for passing the inspection line during the annual inspection of a 4WD vehicle: 1. Currently, full-time 4WD vehicles can undergo inspection at some testing stations. For emission testing, full-time 4WD vehicles can use the dual idle speed method; 2. There is no need to use a chassis dynamometer for gear testing. Simply press the accelerator in neutral as required to obtain the emission data; 3. Similarly, safety technical inspections can now measure braking force and other data using a flatbed inspection line. The flatbed brake testing platform is not a traditional roller brake tester but consists of four brake plates. During testing, the four wheels stop on the brake plates at a speed of five kilometers per hour, allowing the brake plates to calculate the braking force of each wheel, which also meets the dynamic braking force requirements under real driving conditions.
8
0
Share

Is a wheel alignment necessary after replacing all four tires?

Replacing all four tires does not require a wheel alignment because normal tire and wheel replacement does not affect the chassis data. Therefore, a wheel alignment is unnecessary. However, if the tires are replaced due to severe abnormal wear, which has impacted the chassis data, then a wheel alignment is needed. Wheel alignment equipment includes toe gauges, optical level aligners, string aligners, CCD aligners, laser aligners, and 3D imaging aligners, among others. Among these, 3D, CCD, and laser products are the mainstream in the market. Tires are typically made of wear-resistant rubber materials and can be either solid or pneumatic. Pneumatic tires consist of an inner tube and an outer tire. Generally, manufacturers set the service life of tires at 3 years. If a vehicle is driven 20,000 kilometers per year, replacement may be considered after 2 to 3 years.
14
0
Share

What Are the Reasons for a Car's Water Temperature Being Prone to Overheating?

Car water temperature being prone to overheating may be due to a lack of water in the car's radiator, causing the engine temperature to rise too high. It could also be because the car's thermostat is malfunctioning or there is a leak in the car's water pipe, both of which can lead to the car's water temperature becoming too high. There are many reasons for a car's water temperature to overheat, such as hot summer weather causing the car's air conditioning to operate under excessive load, leading to a failure in the cooling system. When a car's water temperature is too high, it is necessary to check whether the engine's fan is operating normally, whether the radiator is leaking, and whether there is a lack of coolant. If the car's radiator is leaking, it needs to be replaced or repaired promptly. If there is a lack of coolant, you can open the radiator cap to add antifreeze when the car's water temperature drops below 50 degrees Celsius. If the car's radiator is severely leaking, the car should not be started.
19
3
Share

What Should You Pay Attention to When Driving in Winter?

When driving in winter, you need to pay attention to: 1. Control your speed and maintain a safe distance; 2. Check the vehicle's condition before traveling; 3. Remove fog from the windshield promptly, with the most important being speed control. Whether walking or driving in winter, icy and snowy roads are inevitably slippery, especially when driving. Negligence can lead to many hazards and is particularly prone to accidents. During such critical times, necessary measures must be taken to avoid accidents, with safety being the top priority. The foremost rule for driving in snowy conditions is to go slow, followed by maintaining a sufficient distance from the vehicle ahead, and braking in advance. If you notice the distance to the vehicle ahead decreasing, regardless of the reason, immediately ease off the accelerator, slow down, and place your foot on the brake pedal ready to brake—never take chances. Additionally, turn on the rear window defroster when driving in snow, as fog on the rear window can obstruct the view in the center rearview mirror, making it difficult to assess the situation of vehicles behind you.
20
0
Share

What is the sequence for testing lights?

Testing light sequence: 1. Drive the vehicle to be tested into the tester as perpendicular as possible to the screen or guide rail of the tester, keeping a distance of 3m between the headlights and the tester's receiver; 2. Use the vehicle alignment device to ensure the tester is properly aligned with the vehicle; 3. Turn on the headlights, use the headlight aligner to align the tester with the headlights to be tested, then adjust the fixed screen to the same height as the headlights, paying special attention to ensure the receiver coincides with the center of the headlight's lens surface; 4. Align the zero points of the left and right optical axis scales on the fixed screen with the reference pointer on the movable screen; 5. Move the receiver up, down, left, and right until the photometer reading reaches its maximum value. At this point, the optical axis deviation can be determined based on the vertical scale value indicated by the reference pointer on the movable screen and the horizontal scale value indicated by the reference pointer on the fixed screen; 6. The luminous intensity of the headlights can be determined based on the photometer reading at this time.
5
1
Share

Can Airbags Be Added to a Car?

Methods for Adding Airbags to a Car: 1. Theoretically, if a car is to be equipped with airbags, it must meet several essential requirements. First, the car must have designated positions for airbag installation. Second, it must be equipped with automatic detection devices. These are the two mandatory hardware conditions for the car. 2. For cars originally without airbags, in addition to meeting the aforementioned hardware requirements, it is also necessary to apply to the vehicle management office for airbag installation. Failure to apply constitutes illegal modification, as altering the car's structure privately violates Chinese laws. 3. Besides applying to the vehicle management office, the installation must be carried out by qualified companies or industry units. Installing airbags is not a simple task, as it involves not only complicated procedures but also a significant amount of money to complete the work.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.