···
Log in / Register

Why can't the NIO EP9 be driven on public roads?

1Answers
StSerenity
07/29/2025, 11:48:18 AM

Because it is not a road-legal vehicle. The EP9 is a track-only sports car and cannot be licensed for public road use. Here are the relevant details: 1. Powertrain: The NIO EP9 is equipped with four high-performance electric motors and four independent gearboxes, with peak torque reaching up to 1,480 Nm per wheel. The pure electric powertrain delivers a maximum output of 1,360 horsepower, with a top speed of 313 km/h. It accelerates from 0-100 km/h in just 2.7 seconds. 2. Equipment: The NIO EP9 is fitted with racing-oriented components such as push-rod suspension, slick tires, and carbon-ceramic composite brake discs.

Was this review help?
110
Share
More Q&A

What to Do If You Failed the Driving Test (Subject Two) Twice? Should You Continue?

You can continue taking the Subject Two test, as you have a total of five attempts. Below is relevant information about Subject Two: 1. Introduction: Subject Two, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test. For small vehicles C1 and C2, the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Passing Criteria: The test is scored out of 100, with criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is passed under the following conditions: (1) For applicants of large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required. (2) For other vehicle types, a score of 80 or above is required.
117
Share

What Causes the One-Button Start to Fail to Turn Off the Engine?

Reasons why the one-button start fails to turn off the engine: 1. The key is not detected. Sometimes, strong nearby magnetic fields can interfere with key detection. In such cases, aligning the key with the one-button start should resolve the issue. 2. Battery issues. If the battery is dead or its voltage is below 12V, pressing and holding the button can turn off the engine. 3. Generally, if the one-button start fails to turn off the engine, shifting to P gear and restarting before turning off again can solve the problem. If this doesn't work, it's best to contact a 4S shop for professional assistance. Below is some related information about the one-button start: The one-button start system is part of a smart car, a button device designed to simplify the starting process, which can also turn off the engine. This device can be retrofitted either at the original car key lock position or as an independent panel.
108
Share

What is the Principle of Plug-in Hybrid Vehicles?

Principle of Plug-in Hybrid Electric Vehicles (PHEVs): A plug-in hybrid vehicle primarily operates on electric power, with a gasoline (or diesel) engine serving as an auxiliary power source only when the battery is depleted and cannot be promptly recharged. Plug-in hybrid vehicles represent a new type of hybrid vehicle. Plug-in hybrid vehicles are equipped with two power systems: an internal combustion engine and an electric motor. These two systems can operate independently or work in tandem to propel the vehicle. Generally, hybrid electric vehicles refer to those that combine an internal combustion engine generator with a battery-powered electric system. Characteristics of Plug-in Hybrid Vehicles: They are equipped with an engine that charges the battery and can operate in pure electric mode. Once the battery is depleted, the vehicle switches to hybrid mode (primarily powered by the internal combustion engine) while simultaneously recharging the battery. In contrast, conventional hybrid electric vehicles have a much smaller battery capacity, which only supplies and recovers energy during starting, stopping, accelerating, and decelerating. These vehicles cannot be charged externally and cannot travel long distances in pure electric mode. Usage Precautions for Plug-in Hybrid Vehicles: Properly Manage Charging Time: During use, accurately determine the charging time based on actual conditions, considering factors like frequency of use and driving distance. Under normal driving conditions, charging should commence when the battery indicator shows red and yellow lights. If only the red light remains, stop operation and charge as soon as possible to prevent severe battery life reduction due to over-discharge. Avoid Direct Sunlight: Electric vehicles must not be exposed to direct sunlight. High temperatures can increase internal battery pressure, leading to water loss, reduced battery activity, and accelerated plate aging. Prevent Plug Overheating During Charging: Loose 220V power plugs or charger output plugs, as well as oxidized contact surfaces, can cause plug overheating. Prolonged overheating may result in short circuits or poor contact, damaging both the charger and the battery, leading to unnecessary losses. Therefore, promptly clean any oxides or replace connectors if such issues are detected.
103
Share

What is the Mnemonic for Subject 2 Driving Test?

Starting Procedure Mnemonic: "Step, Shift, Signal, Lift, Release": "Step": Press the clutch with your left foot; "Shift": Shift into 1st gear to start; "Signal": Turn on the left turn signal; "Lift": Slowly lift your left foot to release the clutch; "Release": Release the handbrake, i.e., the parking brake. Reverse Parking: First reverse to the right, turn the steering wheel fully right and wait to enter the parking space; Straighten the wheel after entering and make minor adjustments; A half turn adjustment is sufficient; Move out to the left until the end, keep the position and shift to reverse gear; Return following the same principle to straighten into the parking space, then exit to the right to complete. Parallel Parking: Stop parallel and shift to reverse gear, turn fully right at the point; Straighten the wheel when seeing the corner of the parking space, after the rear wheel enters the space in the left mirror; Turn fully left until parallel, turn on the signal and exit while straightening. Hill Start: Adjust direction for stopping at the designated point, make small frequent adjustments to get close to the edge. Right Angle Turn: Right angle turn is the simplest, aim at the point and turn fully. Curve Driving: Curve driving requires caution, adjust frequently with about one turn of the wheel; Turn the wheel slightly late to ensure the rear of the car does not cross the line.
114
Share

What are the reasons for the other party not being able to hear clearly when making calls via car Bluetooth?

There may be too much noise when the car Bluetooth is on, so you can try turning off the Bluetooth to make calls. The functions of car Bluetooth are as follows: Eliminating noise and echo: Using advanced digital signal processors and voice equipment, it is suitable for any harsh environment, eliminating background noise and echo, allowing both parties to enjoy high-quality call effects, with an effective range of 10 meters; Automatic identification of mobile phones: It can connect with mobile phones without the need for cables or phone holders. You can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
105
Share

Which province does the license plate starting with 'Pu' belong to?

Currently, there are no license plates that start with 'Pu'. Below is relevant information about license plates: 1. The license plate code consists of 2 characters, which are a Chinese character and an English letter. The Chinese character represents the abbreviation of the province, autonomous region, or municipality directly under the central government, while the English letter denotes the code of the vehicle management office. The license plate number consists of 6 characters, which can be Arabic numerals or a combination of Arabic numerals and English letters. The first character of the license plate represents the provincial-level administrative region where the vehicle is registered, and the second character represents the prefecture-level administrative region, indicated by letter codes. 2. The license plate serves as a unique identifier and information registration for each vehicle. Its primary function is to identify the region to which the vehicle belongs and to trace the vehicle's owner and registration details based on the license plate.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.