···
Log in / Register

Which is better, the Tayron or the Tharu?

1Answers
VeraDella
07/29/2025, 07:06:19 PM

Tayron and Tharu each have their own advantages in different aspects. Body dimensions: The latest top-end version of the Tayron has body dimensions of 4589(mm) x 1860(mm) x 1660(mm), with a wheelbase of 2731(mm). The latest top-end version of the Tharu has body dimensions of 4453(mm) x 1841(mm) x 1632(mm), with a wheelbase of 2680(mm). Overall, the top-end version of the Tayron is longer than the Tharu, and its wheelbase is also slightly longer. Configuration: Comparing some safety features, driving assistance configurations, lighting configurations, and interior configurations between the top-end versions of the Tayron and Tharu, the Tharu's top-end version is more comprehensively equipped than the Tayron's. Power: The Tayron is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 220Ps, maximum power of 162kW, and maximum torque of 350N·m, paired with a 7-speed dual-clutch transmission. The Tharu is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186Ps, maximum power of 137kW, and maximum torque of 320N·m, paired with a 7-speed dual-clutch transmission. In terms of power output, the top-end version of the Tayron is more powerful than the Tharu.

Was this review help?
115
Share
More Q&A

Is it okay to park a manual transmission car without engaging the handbrake?

Manual transmission cars do not have a locking mechanism in the gearbox like the P (Park) gear in automatic transmission cars, where the parking pawl engages with the parking gear to lock the vehicle and prevent it from moving forward. When parking a manual transmission car, it is essential to engage the handbrake; otherwise, the car may roll away. Moreover, when parking a manual transmission car, you should first engage the handbrake and then shift to neutral. The reasons are as follows: 1. Safety: Developing the habit of engaging the handbrake first when parking increases safety. The handbrake works by clamping the rear brake discs, preventing the rear wheels from rotating and thus stopping the car from moving due to external forces. 2. Stability: After engaging the handbrake, the car remains stationary, and shifting to neutral ensures the car won't move or stall when the engine is started. 3. Scenario: If you are on a slope and shift to neutral without first engaging the handbrake, forgetting to press the brake pedal could result in the car rolling away.
112
Share

Which is Better, China 5 or China 6?

Of course, China 6 is better. If you are buying a car now and don't plan to use it for a long time, you can opt for a China 5 model, as China 5 cars are currently cheaper. However, if you intend to use the car for an extended period, it's better to choose a China 6 model. Here is an introduction to the China 5 and China 6 emission standards: China 5 Emission Standard: The carbon monoxide emissions per kilometer driven must not exceed 1000 milligrams; non-methane hydrocarbon emissions per kilometer driven must not exceed 68 milligrams; nitrogen oxide emissions per kilometer driven must not exceed 60 milligrams; and PM (particulate matter) emissions per kilometer driven must not exceed 4.5 milligrams. China 6 Emission Standard: The carbon monoxide emissions per kilometer driven are limited to 500 milligrams; nitrogen oxide emissions per kilometer driven are limited to 35 milligrams; PM emissions per kilometer driven are limited to 3 milligrams; and non-methane hydrocarbon emissions per kilometer driven are limited to 35 milligrams. Additionally, the testing cycles differ, comprehensively assessing vehicle emissions during cold starts, acceleration and deceleration, and high-speed, high-load conditions. This covers a broader range of engine operating conditions and imposes higher requirements on vehicle emission control performance.
115
Share

What to Do When a Nail Punctures the Tire Without Air Leakage?

If a nail punctures the tire without causing air leakage and the car can still drive normally, you should drive at a low speed to the nearest repair shop for inspection. However, the issue must not be ignored, as failing to address it may lead to a tire blowout, posing a significant safety hazard. Most car tires are tubeless (vacuum) tires, which do not lose air quickly when punctured by a nail, providing sufficient time to drive to a repair shop for inspection. When a tire is punctured by a nail, do not pull it out immediately, as this could cause severe air leakage, making it impossible to continue driving. Moreover, if the tire pressure is high, removing the nail may result in a blowout, which is extremely dangerous. The sidewall of the tire is relatively thin, and punctures on the sidewall cannot be repaired. Additionally, if the puncture diameter exceeds 6 millimeters, the tire cannot be repaired and must be replaced with a new one.
104
Share

Which Vehicles Are Equipped with a Three-Way Catalytic Converter?

A three-way catalytic converter is generally installed in automobiles. The three-way catalytic converter, mounted in the vehicle's exhaust system, serves as the most crucial external purification device. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. When high-temperature exhaust gases pass through this purification device, the catalyst within the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions. In this process, CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize into water (H2O) and carbon dioxide; and NOx is reduced to nitrogen and oxygen. These three harmful gases are transformed into harmless substances, thereby purifying the vehicle's exhaust. Since this catalytic converter can simultaneously convert the three primary harmful substances in exhaust gases into harmless compounds, it is referred to as a three-way catalytic converter.
101
Share

What is the reason for the loud noise from a newly replaced fuel pump?

The reasons for the loud noise from a newly replaced fuel pump are: 1. The viscosity of the hydraulic oil is too high; 2. Improper installation of the pump and motor, resulting in misalignment of the pump shaft and motor shaft; 3. Blockage in the suction pipe increases the resistance of the pump to draw oil, causing the pump to cavitate or air leakage in the inlet pipe section; 4. Air is trapped inside the pump. Solutions for the loud noise from a newly replaced fuel pump: 1. Select hydraulic oil with appropriate viscosity; 2. Adjust the alignment of the pump and motor installation; 3. Add oil into the pump to lubricate the pump's bearings, plungers, and cylinder block, and open the pump's oil filler port during operation to allow air inside the pump to escape from the filler port.
101
Share

What is the fuel consumption per 100 kilometers for the Haval M6 Plus automatic transmission?

Haval M6 Plus automatic transmission has a fuel consumption of approximately 6.9L per 100 kilometers. The method to measure fuel consumption is: fill up the fuel tank and reset the odometer to zero, then calculate the distance traveled until the fuel runs out. Divide the liters of fuel added by the kilometers traveled and multiply by 100 to get the average fuel consumption per 100 kilometers. Taking the Haval M6 Plus 2021 1.5T Manual Elite Intelligent Connect version as an example: it is a compact 5-door, 5-seat SUV under Great Wall Motors, equipped with a 6-speed manual transmission and a fuel tank capacity of 55L. The car's length, width, and height are 4664mm, 1830mm, and 1729mm respectively, with a wheelbase of 2680mm. The engine's maximum torque is 210 Nm, and the maximum horsepower is 150 hp.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.