Which country does Ford belong to?

What to Do When the Automatic Transmission Handbrake Won't Release?

If the automatic transmission handbrake won't release, try pressing the handbrake button while pulling it up first and then pushing it down. If this doesn't work, take it to a repair shop. The consequences of driving with the handbrake engaged are as follows: Driving with the handbrake engaged for an extended period directly causes wear and tear on the handbrake. Moreover, the pressure on the handbrake isn't constant while driving; it changes with speed, going over speed bumps, or even hitting obstacles. This means the handbrake undergoes continuous wear of varying degrees during the drive. In severe cases, it can lead to brake failure, smoke, or even fire. Prolonged driving with the handbrake engaged may also cause the brake caliper to seize, brake fluid to leak, or the brake fluid temperature to rise excessively, resulting in complete loss of braking function. If you notice a strong burning smell or smoke coming from the rear of the car, immediately reduce speed, apply the brakes, and release the handbrake.

8

3

Share

In which year did China's National V vehicle emission standards come into effect?

China's National V emission standards, officially known as the Fifth Stage National Motor Vehicle Emission Standards, were implemented nationwide starting from January 1, 2017. Below is relevant information about emission standards: National V: The Fifth Stage National Motor Vehicle Pollutant Emission Standards, referred to as "National V standards," feature emission control levels equivalent to Europe's currently implemented Euro 5 standards. The European Union has enforced these since 2009, imposing stricter limits on vehicle emissions such as nitrogen oxides (NOx), hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM). Each upgrade from National I to National IV reduced single-vehicle pollution by 30% to 50%. Comparison with National IV: The new standards reduce NOx emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Taking Shanghai's annual vehicle registration volume of approximately 350,000 units as an example, the annual NOx emissions from new vehicles are expected to decrease by about 1,000 tons. Additionally, China's National V standards match the emission control levels of Europe's currently implemented Euro 5 standards.

18

1

Share

What is the function of the carburetor needle height?

It forms an annular main nozzle with the carburetor's main jet to deliver a certain amount of combustible air-fuel mixture to the cylinder head. Below is the relevant introduction: When the needle clip is adjusted upward, the needle position moves relatively downward, and the annular main nozzle of the carburetor will also decrease accordingly. At this time, the combustible air-fuel mixture delivered to the cylinder head through the main nozzle will become leaner. Conversely, a richer combustible air-fuel mixture will be obtained. The adjustment of the needle position will directly cause a noticeable change in the carburetor's air-fuel mixture ratio. Although it may start smoothly under different conditions, during normal driving, it can lead to various engine issues, such as stalling when accelerating, incomplete combustion in the cylinder head, black smoke from the exhaust pipe, and a series of other problems.

6

3

Share

Is Engine Carbon Deposit Cleaning Necessary?

Engine carbon deposit cleaning is necessary. Below are specific details about engine carbon deposit cleaning: Benefits of carbon deposit cleaning: Improves vehicle power; saves fuel consumption; reduces knocking points; promotes environmental maintenance; extends engine lifespan; enhances braking accuracy. Cleaning methods: Remove the throttle body, clean both sides with carburetor cleaner, and dry with a cloth. Generally, clean the throttle body once a year or every 20,000 kilometers; for internal engine carbon deposit cleaning, it can be done before changing to new engine oil. Open the oil cap, add a cleaning agent, mix it with the old oil, and let it idle for about 10 minutes; for intake system cleaning, buy a bottle of intake system cleaner, pour it into the storage tank of a specialized cleaning device, connect it to the intake system, and use vacuum to draw the cleaner into the intake passages for cleaning. Cleaning intake system carbon deposits mainly refers to cleaning the carbon deposits inside the intake passages, intake manifolds, etc. This removes internal carbon deposits in the intake system, increases intake flow and speed, and reduces engine shaking and idle instability.

16

4

Share

Is It Serious If the Small Metal Block on the Wheel Hub Falls Off?

The small metal block on the wheel hub falling off is not a serious issue. Below are specific explanations regarding the small metal block falling off: Function: The small metal block on the wheel hub is used for tire dynamic balancing. If it falls off, it needs to be reinstalled. The wheel should be removed, and a lead block of the corresponding weight should be hammered into the same position. Then, perform wheel dynamic balancing again before reinstalling the wheel. Impact: If the block is not replaced after falling off, it will affect the driving comfort of the vehicle. Prolonged driving may lead to vehicle jolting, deviation, abnormal tire wear, and increased safety hazards. The car wheel is an integral unit composed of the tire and the wheel hub. Due to manufacturing processes, the weight distribution of various parts of the wheel is uneven. When the car rotates at high speed, dynamic imbalance occurs, leading to unstable driving and steering wheel vibration. To avoid or eliminate this phenomenon, weight is usually added to the side of the wheel to correct the balance of various parts of the wheel.

13

3

Share

What is the difference between plug-in hybrid and mild hybrid?

Light hybrid and plug-in hybrid differ mainly in the role of the electric power system's power output. The following is a comparison between the two: Battery: The mild hybrid has a smaller battery, and the electric power can only play an auxiliary role. Plug-in hybrid vehicles have a larger power battery, allowing the vehicle to drive purely on electricity like an electric car. In other aspects of the vehicle, there is not much difference. Mild Hybrid: Mild hybrid, also known as MHEV, most commonly features a 48V mild hybrid system, which quadruples the voltage compared to the 12V voltage of conventional fuel vehicles, enabling it to power more electrical devices. The electric system of this type of vehicle cannot support pure electric driving. Its motor only intervenes when the vehicle is at low speeds, effectively reducing the engine's fuel consumption. The battery is recharged by the generator during vehicle operation. Plug-in Hybrid: Plug-in hybrid vehicles are equipped with both electric and fuel power systems, featuring a larger power battery. They can drive purely on electricity for 50 to 110 kilometers, and when the battery is depleted, the engine takes over to drive the vehicle. Plug-in hybrid vehicles can be recharged using an external power source, achieving the environmental and energy efficiency levels of electric vehicles when driving purely on electricity. Plug-in hybrid models are classified as new energy vehicles and can be registered with new energy license plates.

3

Share

Which country does Ford belong to?

What to Do When the Automatic Transmission Handbrake Won't Release?

In which year did China's National V vehicle emission standards come into effect?

What is the function of the carburetor needle height?

Is Engine Carbon Deposit Cleaning Necessary?

Is It Serious If the Small Metal Block on the Wheel Hub Falls Off?

What is the difference between plug-in hybrid and mild hybrid?

What brand is the engine of Changan Oushang X5?

What are the penalties for not wearing a seatbelt in the passenger seat?

Subject 3 Deduction Rules?

Does proceeding after the front of the car has just passed the stop line when the light turns red count as running a red light?