Not using the turn signal or using it incorrectly results in a deduction of 10 points per occurrence. The specific regulations are as follows: Failing to use or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will deduct 10 points. Turning within less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will deduct 10 points. There are 6 instances in Subject 2 where the turn signal must be used: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on a slope. 3. Use the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the curb before reversing. 4. Turn on the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to move left. 5. Shift into drive and turn on the left turn signal before exiting the parking space in parallel parking, turning it off promptly after exiting. 6. Turn on the left turn signal when entering the right-angle turn area, turning it off promptly after completing the turn. Subject 2 is scored out of 100 points, with criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is passed if the following conditions are met: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-turns). Some regions also include a sixth item: high-speed toll card collection. The A1, A2, A3, B1, and B2 license tests include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
