Which car's steering wheel has an airbag?

1 Answers
DelDaisy
07/24/25 9:24pm
airbag does not refer to a brand. It is a safety feature of a vehicle, meaning the car's airbag system. The following is relevant information about airbag: 1. Introduction: The airbag system is a passive safety coefficient (see car safety coefficient) protection system. When used in conjunction with seat belts, it can provide effective collision protection for passengers. 2. Conditions for airbag deployment: To ensure that the airbag deploys at the appropriate time, car manufacturers have generally set specific conditions for airbag deployment. The airbag will only deploy if these conditions are met. In some traffic accidents, passengers may suffer severe injuries or even life-threatening situations, and the car may be nearly totaled, but if the conditions for airbag deployment are not met, the airbag will still not deploy.
Was this review help?
10
4
Share
More Forum Discussions

What are the common maintenance tasks for cars in use?

Common maintenance tasks for cars in use include: 1. Turn on the ignition before starting the vehicle; 2. Regularly check the brake pads; 3. Let the car idle for about a minute when starting a cold engine; 4. Refuel promptly before the oil light comes on; 5. Do not drag the gear while driving; 6. Do not accelerate sharply when starting, and shift gears when reaching a certain RPM. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Its purpose is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
1
0
Share

Which Direction to Turn When Tightening or Loosening Lug Nuts?

When changing tires, the direction to turn lug nuts depends on the vehicle type. For passenger cars, turning right tightens the nuts while turning left loosens them. However, the direction is reversed for heavy-duty trucks. Using Lubrication to Remove Stubborn Lug Nuts: If you find the lug nuts too tight to loosen, the most straightforward solution is to seek assistance from another person. Alternatively, you can apply a lubricating solvent to the nuts to facilitate removal. Precautions When Removing Lug Nuts: You may use moderate foot pressure to increase tightening force, but avoid excessive or uncontrolled kicking. This could damage the nuts or bolts and might cause the wrench to suddenly slip off, posing safety risks.
16
2
Share

Can Transmission Fluid Be Added?

Transmission fluid can be added. Long-term used transmissions: After prolonged use, transmissions often exhibit gearshift jerking. The situation significantly improves after replacing the transmission fluid because the viscosity coefficient of old oil can no longer match that of new oil. After replacement, it returns to the ideal state designed originally. Using incorrect oil products: In some extreme cases, using the wrong transmission fluid can even lead to transmission burnout. This is because not only is the viscosity carefully calculated and matched, but heat dissipation is also meticulously designed. If the transmission fluid's heat-carrying capacity is too strong or too weak, it will reduce the efficiency of the cooling mechanism, thereby affecting heat dissipation and causing transmission burnout.
13
0
Share

What are the reasons for the car not starting?

Reasons for the car not starting: Incorrect starting method, improper fuel mixture ratio, etc. Incorrect starting method: Incorrect starting method, such as not closing the choke during a cold start, or not pressing the float sinker, resulting in an overly lean combustible mixture entering the cylinder; during a hot start, closing the choke or pressing the float sinker multiple times, causing an overly rich combustible mixture to enter the cylinder, leading to the spark plug being "flooded" and the engine failing to start. Improper fuel mixture ratio: Check the spark plug to determine whether the issue is with the ignition system or the fuel supply system based on the strength of the spark.
3
3
Share

Where is the body control module located in the BMW X5?

The body control module of the BMW X5 is located beneath the center of the dashboard and can be accessed by removing the passenger side trim panel. Below are the main functions of the BMW X5 body control module: 1. Receives input information from sensors or other devices and converts it into signals that the microprocessor can process. 2. Stores, calculates, and analyzes information, processes the programs used for output values, stores the vehicle's characteristic parameters, operational data, and fault information. 3. Performs computational analysis. Determines execution command data based on information parameters, compares input information with standard values, and identifies faults. 4. Outputs execution commands. Converts weak signals into execution commands, outputs fault information, and performs self-correction.
4
2
Share

Can You Buy a Pass If You Fail the Subject 1 Test?

You cannot buy a pass if you fail the Subject 1 test, as there are surveillance systems and identity verification in place. Below is an introduction to the Subject 1 test: 1. Test Content: The test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. 2. Alternate Name: The Subject 1 test is also known as the Subject 1 Theory Test or Driver Theory Test. 3. Test Format: The test is computer-based and conducted at the vehicle management office. The question bank consists of 1,229 questions, from which 100 questions are randomly selected in a specified proportion. 4. Question Types: The questions include multiple-choice and true/false questions, with a full score of 100. A score of 90 or above is required to pass.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.