···
Log in / Register

What are the standards for vehicle modification certification?

1Answers
DiAlexis
07/29/2025, 09:34:49 PM

Vehicle modification certification standards are as follows: 1. Headlight modification: For unauthorized installation of xenon headlights, according to Article 90 of the Road Traffic Safety Law, such unauthorized modification violates vehicle safety principles and will result in a fine and 3 demerit points. 2. Appearance modification: According to the newly revised Regulations on Motor Vehicle Registration, changes to body color, engine replacement, or body/frame replacement require the owner to apply for modification registration with the vehicle management office, otherwise penalties will be imposed. Although the regulations don't specifically address tires, industry insiders reveal that vehicles with modified wheel rims or size changes will definitely fail annual inspections.

Was this review help?
117
Share
More Q&A

Which is more powerful, fuel-saving switch 0 or 1?

Fuel-saving switch 1 is more powerful. Here are the relevant details: 1. Function: It adjusts the engine's output power, providing lower power when the vehicle is empty to save fuel, while delivering full power when heavily loaded to meet the vehicle's rigid demand for power. 2. Conditions: Switching this switch has certain conditions; the vehicle speed must be below 5 km/h, the engine speed below 800 rpm, and the throttle opening less than 5%. In other words, adjusting it while driving is ineffective, and it must be set before driving. 3. Vehicle Types: In trucks compliant with National IV standards or above, there is usually a dial or knob on the dashboard labeled with four positions: 'Heavy,' 'Medium,' 'Light,' and 'Empty.' This is the vehicle's 'Engine Multi-state Torque Switch,' commonly known as the 'Fuel-saving Switch.'
110
Share

What is the difference between Volvo B5 and T5?

Volvo B5 and T5 differ in their engines. The Volvo B5 engine is equipped with a 48V mild hybrid system, while the T5 engine does not have a 48V mild hybrid system. The B5 engine also features an improved automatic start-stop system. The T5 has a maximum horsepower of 254 hp, whereas the B5 has a maximum horsepower of 250 hp. Definition of metric horsepower: Metric horsepower, also known as PS (Pferdestärke), is entirely artificially defined and set at a value very close to imperial horsepower. One metric horsepower is defined as the power required to perform 75 kilogram-force meters of work per second. Definition of imperial horsepower: The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to represent the power of his steam engine relative to the pulling power of horses. It is defined as the power of a horse capable of pulling 33,000 pounds at a speed of one foot per minute, with the standard units being watts (W) or kilowatts (kW).
116
Share

What is the Hyundai Matrix?

Hyundai Matrix is the Hyundai Matrix car. The following is a related introduction to the Hyundai Matrix: 1. Power: The Matrix in production comes with two displacement models: 1.6L and 1.8L. The 1.8L engine delivers a maximum horsepower of 122ps at 6000rpm and a maximum torque of 16.4kg.m at 4500rpm. 2. Interior: The dashboard shows excellent performance in terms of the control of seam sizes between components and the assembly quality of components. Even the plastic decorative panels with a titanium-like metallic finish demonstrate fine surface treatment and excellent color control.
111
Share

What do emergency braking and engine braking mean?

Here is the relevant introduction to emergency braking and engine braking: 1. Emergency braking: Emergency braking, also known as emergency stop, is the vehicle's secondary braking system, used when the primary braking system fails suddenly during driving. For vehicles using compressed air, since the rear axle employs a dual-chamber brake air chamber, the parking brake simultaneously serves as the emergency brake. Some vehicles use the rear axle brake as the hand brake, which also functions as the emergency brake. 2. Engine braking: Engine braking refers to lifting the accelerator pedal without depressing the clutch, utilizing the compression resistance, internal friction, and intake-exhaust resistance generated by the engine's compression stroke to create a braking effect on the drive wheels. Engine braking fully utilizes the engine's drag to control the vehicle speed. This method is most commonly used in mountainous areas, especially when descending large mountains or steep slopes. Frequent use of the brake can cause it to overheat, leading to reduced braking efficiency.
119
Share

Is Computer Matching Required After Replacing a Car Battery?

After replacing a car battery, computer matching is not required; at most, you may need to reset the radio. Here is some relevant information: 1. Battery: A battery refers to a device that can be recharged and reused after discharging. Common types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. In a lead-acid battery, the positive electrode is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge, the positive and negative electrodes react with sulfuric acid to form lead sulfate. When the sulfuric acid concentration drops to a certain level, the battery must be recharged. 2. Car Battery: A car battery is a type of battery, also known as a storage battery. Its working principle involves converting chemical energy into electrical energy. Typically, the term 'battery' refers to a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. A battery is a device that can be recharged and reused after discharging.
107
Share

Can a cracked intake hose still be used?

Intake hose cannot be used if cracked. Here are the relevant details: 1. Location: The engine intake hose is generally located between the throttle valve and the engine intake valve. The intake pipe is the main air passage, while the intake manifold distributes air to each cylinder to support combustion. The air passes through the carburetor, where gasoline is atomized and enters the cylinder along with the air. 2. Function: The engine intake tract is the passage for air to enter and exit the air filter. The intake pipe is the manifold connecting the air filter to the carburetor, and the intake manifold is the tube connecting the bottom of the carburetor to the intake valve on the cylinder block. The intake pipe includes the main intake pipe and the branch intake pipes. In addition to requiring power performance, the engine must also have good fuel economy and emission performance.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.