···
Log in / Register

What Documents Are Needed for a New Car's First Maintenance?

6Answers
ZoeyFitz
07/29/2025, 09:34:50 PM

For the first maintenance of a car, you need to bring the vehicle license, maintenance manual, and warranty manual. Below are the six major parts that must be inspected and replaced during the first maintenance of a new car: It is mandatory to replace the engine oil, oil filter, and clean the air filter. Check whether the coolant level in the car is at a normal state. Inspect the car's brakes and undercarriage components for any scratches. Check if the power steering fluid level is normal and whether there are any oil leaks at the oil pipe connections. Examine the condition of the generator, air conditioning, water pump, and the aging and tightness of the belts. Check the tire pressure and wear condition; if there is wear, a tire rotation is required.

Was this review help?
106
Share
VanTanner
08/15/2025, 03:18:38 AM

I just bought a new car and was super excited for my first maintenance service. Remember to bring the owner's manual—the maintenance schedule is recorded inside, which helps the technician understand the specific requirements. The vehicle registration certificate is necessary to prove ownership, and the car keys are essential—otherwise, the car can't be driven in. Make an appointment online or by phone in advance to save time, and bring your ID card if identity verification is needed. Free first maintenance is a common benefit, but it's best to confirm the appointment details. Forgetting the manual can be troublesome, as the technician won't be able to accurately check items like the engine oil and filters. Maintenance is key to keeping your new car in top condition during the honeymoon period—go early to avoid peak-hour queues. After completion, request the maintenance records—they’re very useful for preserving the car’s value. Also, be sure to ask about the next maintenance cycle.

Was this review help?
16
Share
Expand All
DelAmara
10/20/2025, 03:54:07 AM

As an experienced driver, I must remind you: bringing the owner's manual is crucial as it lists all maintenance items. Don't forget your vehicle license and car keys. It's advisable to book an appointment in advance and bring your phone to confirm the reservation code. Most first maintenance services are free, but keep some spare change handy for unexpected expenses. During maintenance, check tire pressure and brake systems to prevent minor issues from becoming major problems. Spend some free time reading the manual to learn about routine maintenance - this can save multiple trips to the shop and ensure your vehicle's long-term healthy operation.

Was this review help?
17
Share
Expand All
VonJoy
12/03/2025, 03:25:47 AM

Bringing the owner's manual is sufficient, along with the vehicle registration to prove identity, and don't forget the car keys. The first maintenance is usually free, and the technician will proactively check the engine oil, filters, etc. Appointments are convenient and quick. Forgetting the manual may delay the process. Remember to review the report after maintenance to familiarize yourself with the vehicle's condition. This step is crucial for the lifespan of a new car.

Was this review help?
5
Share
Expand All
KateAnn
01/23/2026, 10:01:48 PM

I'm usually busy with work, so I prepare efficiently for the first maintenance: bring the owner's manual, vehicle license, and car keys, and keep the confirmation SMS after making an appointment. The manual helps the technician diagnose quickly, avoiding repetitive communication troubles. Make sure to take advantage of the free maintenance opportunity, check tire pressure and engine fluid levels, and request electronic records to be sent to your email after maintenance to save time for the next visit. Proper vehicle maintenance ensures a worry-free daily commute.

Was this review help?
11
Share
Expand All
RafaelMarie
04/19/2026, 04:12:20 AM

Bringing the owner's manual, vehicle registration, and car keys is essential. Confirm the details when making an appointment. The first maintenance is free, but bring identification for auxiliary registration. Be meticulous: prepare a small notebook to record the technician's advice, such as the next maintenance mileage. The maintenance includes checking the brake fluid and cooling system, which not only prevents malfunctions but also promotes optimized eco-friendly emissions. Follow up on the report after completion to ensure the new car remains in reliable condition for a long time.

Was this review help?
19
Share
Expand All
More Q&A

How to Coordinate the Clutch and Brake?

Here are the specific methods for coordinating the clutch and brake: 1. Automatic transmission cars do not have a clutch pedal, so you can directly press the brake. 2. When driving at high speed or normal speed, to slow down, there is no need to press the clutch. 3. When going around a curve, first press the brake to slow down. After the curve, if there are no obstacles, there is no need to press the clutch; release the brake and press the accelerator to speed up. If there is an obstacle right after the curve, press the clutch and shift to a lower gear. 4. When going down a long or steep slope, do not press the clutch; use the engine's traction for braking. 5. When intending to stop, first press the brake to reduce speed and then press the clutch.
104
Share

What Causes the Steering Wheel to Be Misaligned in a Sedan?

Reasons for a misaligned steering wheel in a car include: 1. After the vehicle has been used for some time, steering wheel misalignment may occur, which can be related to tire pressure, tire wear, wear of chassis components, or wheel alignment. First, measure the tire pressure on both sides. When the tire pressure on both sides is inconsistent, the vehicle will tend to drive toward the side with lower pressure. If the tread wear on the two front tires is uneven, it can also cause the vehicle to pull to one side. 2. If there are no issues with the tires, it is recommended to visit a 4S shop to inspect the condition of the chassis components. Changes in wheel alignment values can also lead to steering wheel misalignment after some use. Additionally, the tie rod may have shifted to one side, causing the steering wheel to be misaligned.
108
Share

How many hours does it take to fully charge a dead car battery?

A dead car battery generally takes about 15 to 20 hours to fully charge. Precautions for battery charging include: 1. Connect directly to the battery for charging, avoiding removal of the battery to prevent data loss; 2. If the battery voltage is 10% lower than the rated voltage, it may lead to battery discharge; 3. Avoid water contact with the battery during charging. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine is off or at low idle, it powers the vehicle's electrical equipment; 3. It can assist in powering electrical devices when the generator's output is insufficient; 4. It mitigates impact voltage in the electrical system, protecting the vehicle's electronic devices; 5. It stores excess electricity generated by the alternator.
120
Share

What is the fuel consumption of a 460-horsepower engine idling for one hour?

460-horsepower engine idling for one hour generally consumes between 1-2L of fuel. Below is relevant information about car engine idling: 1. The function of car idling: Idling is a working condition of a car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle size, etc. Idling means the engine 'outputs power without doing work.' When the engine is running, if the accelerator pedal is completely released, the engine is in an idling state. 2. Causes of unstable idling: Direct causes refer to mechanical parts being dirty, worn, or incorrectly installed, leading to changes in cylinder power, resulting in an imbalance of power among cylinders and causing unstable idling. Indirect causes refer to abnormalities in the engine's electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance the power of each cylinder, and causing unstable idling.
111
Share

Is It Harmful to Start the Car in First Gear?

Starting the car in first gear is harmful. Not only does it damage the clutch plate, but it also easily harms the engine, drive shaft, and rear differential. Steps to start an automatic transmission car: First, ensure there are no obstacles or people around the vehicle, then get in. Turn the key to the ON position and allow the vehicle to power on for a few seconds to complete the self-check. Then, press the brake and turn the key to start the vehicle. After starting, shift into D gear, slowly release the brake, and the car will move forward. Steps to start a manual transmission car: For a manual transmission, press the clutch before starting the engine, then shift into first gear. Gradually release the clutch while moving your right foot from the brake pedal to the accelerator pedal and gently apply some gas. Coordinate the use of the accelerator and clutch to allow the car to move forward slowly.
103
Share

Why does fuel consumption increase after an engine overhaul?

The reasons for increased fuel consumption after an engine overhaul are: New parts are precisely manufactured and tightly fitted, which increases the engine's workload and consequently fuel consumption. This is a normal situation. If the fuel consumption is only slightly higher, it's completely normal. This is because the vehicle's computer is often reset during maintenance, and the average daily fuel consumption will be reset. It should return to normal after a few days of adaptation. Other reasons for increased fuel consumption after engine repair: The viscosity of the engine oil used has increased. It's commonly known that higher viscosity engine oil is better. The function of engine oil is lubrication, and higher viscosity indicates better quality oil. However, if the oil viscosity is too high, the engine will encounter greater resistance during high-load operation, consuming more power and naturally increasing fuel consumption significantly compared to before. Lastly, another possible reason is incorrect tire pressure or improper tire size. Underinflated tires will affect fuel consumption, as lower tire pressure increases the contact area between the tire and the ground, resulting in greater driving resistance.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.