···
Log in / Register

Where to Place ID Card for Subject 2?

6Answers
LeMary
09/08/2025, 01:44:40 AM

After swiping the ID card, keep it safely on your person. Below is additional information: Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license examination and refers to the field driving skills test. For the C1 license, the test items include five mandatory sections: reverse parking into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on an S-curve (some regions also include a sixth item: receiving a card on a highway). For the C2 license, the test items include four mandatory sections: reverse parking into a garage, parallel parking, turning at a right angle, and driving on an S-curve. For A1, A2, A3, B1, and B2 licenses, the test items include: pole test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, driving on an S-curve, turning at a right angle, passing through a narrow gate, navigating continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountainous roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

Was this review help?
109
Share
Daisy
09/20/2025, 12:21:19 AM

I remember when I was taking the driving test for Subject 2, the ID card was a crucial item. Before the test, I carefully considered the most convenient place to keep it—the breast pocket turned out to be the best choice. As soon as you enter the test area, the examiner will ask you to present your ID for verification. Keeping it here allows you to pull it out effortlessly, making the process smooth. Avoid the temptation to stash it under the car seat or in the glove compartment for convenience—the car doors are often locked during the test, and retrieving it in a hurry can be a hassle. I once saw a guy who left his ID in the car and ended up scrambling to find it, delaying his test. It's also a good habit to prepare a small bag specifically for your documents during regular practice sessions. On test day, there's a lot going on, and it's easy to get flustered. Taking care of these small details can help you stay focused on your driving skills and improve your chances of passing. In short: keep your ID in an easily accessible spot on your person to breeze through the verification process!

Was this review help?
3
Share
Expand All
SanManuel
11/02/2025, 11:44:26 PM

I just finished my driving test (Subject 2) the other day. I kept my ID card in the right pocket of my jeans, super handy. When the examiner called my name to check my ID, I could pull it out immediately without rummaging through my bag. Keeping it in the car is a big no-no—during the test, you can't just roll down the window or open the door. If it gets stuck, not only will it waste time, but it’ll also totally throw off your focus. Before the test, I checked four or five times to make sure my ID was flat and wouldn’t fall out. Talking to a friend about it later, he suggested keeping it in the inner pocket of my jacket for safety, since test sites can be crowded and losing it would be a hassle. My advice: simulate test conditions during practice sessions to get used to carrying your ID properly. A small tip: wear clothes with pockets to avoid last-minute panic. Nail these little details, and your test will go smoothly.

Was this review help?
11
Share
Expand All
McLaila
12/16/2025, 11:44:30 PM

Thinking back to the days when I took my driver's license test, the second subject was extremely strict, and the ID card had to be carried close to the body. I always kept it in my shirt pocket, so I could reach it immediately, avoiding any panic during inspection. Nowadays, it's the same for everyone taking the test—placing it in the wrong spot can disrupt the process and lead to point deductions. The test center is crowded and chaotic, so don’t be careless; make sure it's easily accessible. Though it may seem like a small matter, it affects the efficiency of the test—getting it right the first time is best.

Was this review help?
17
Share
Expand All
Amir
02/06/2026, 12:33:10 AM

During regular practice sessions, students often ask me about exam details, and one key point is the placement of their ID card. I always remind them: keep it in your pants pocket or jacket pocket, never leave it anywhere inside the car. During the exam, inspectors may conduct random checks at any time, so having it in an easily accessible place allows for quick response, avoiding delays or additional hassles. Also, make sure to prepare your exam admission documents and don't mix up their locations. Practicing mock inspection procedures before the exam can help you get accustomed in advance. Ensuring your documents are both secure and readily accessible greatly contributes to passing the exam.

Was this review help?
5
Share
Expand All
HaydenMarie
05/01/2026, 04:17:41 PM

The placement of your ID during the Subject 2 driving test directly affects the smoothness of the process. I remember planning carefully: placing it in my shirt pocket to ensure it stayed flat and unwrinkled. The test involves multiple ID checks, and misplacing it—like burying it at the bottom of a handbag—can waste time or even cause you to miss your turn. It's advisable to double-check before the test and develop a habit of keeping it in an easily accessible spot to boost efficiency.

Was this review help?
20
Share
Expand All
More Q&A

What are the differences between the Mercedes-Benz C180 and C260?

The differences between the Mercedes-Benz C180 and C260 are as follows: 1. Different power: The Mercedes-Benz C180 is equipped with a 1.6T inline 4-cylinder turbocharged engine with a maximum power of 115KW; the Mercedes-Benz C260 is equipped with a 1.5T inline 4-cylinder turbocharged engine with a maximum power of 135KW. 2. Different appearance: The Mercedes-Benz C180 has a single sunroof; the Mercedes-Benz C260, except for the sports version, all other models have a panoramic sunroof. 3. Different dimensions: The exterior dimensions of the Mercedes-Benz C180 are 4783mm in length, 1810mm in width, and 1442mm in height; the C260 has exterior dimensions of 4784mm in length, 1810mm in width, and 1457mm in height.
101
Share

How many seat belts are there in the back of a car?

If the car is a 5-seater, there are usually 3 seat belts in the back seat. The seat belt in the middle position of the back seat comes in two forms: one is a two-point type, and the other is a three-point type. The retraction points of these two types of seat belts are different from those of the seat belts on the two sides, so they are often overlooked. Here are the correct ways to use seat belts: When using a seat belt, first adjust the height of the seat belt. The shoulder belt must cross the middle of the shoulder. In the event of sudden braking, if the seat belt is too high, it will strangle the neck, and if it is too low, it cannot prevent the body from leaning forward. Moreover, the waist belt must be fastened below the abdomen, especially for pregnant women and overweight people. Incorrect usage can easily lead to injuries.
111
Share

What Are the Disadvantages of Stock Cars?

Stock cars parked for a long time may lead to the aging of equipment such as batteries, tires, and wiring, posing safety hazards. Here is some extended information about stock cars: 1. Stock Cars: There is no clear legal definition for stock cars, but the term "stock car" does exist in the automobile sales industry. Generally, it refers to vehicles that have been manufactured for more than 12 months, while those produced over 2 years ago are considered severely stocked cars. The manufacturing date is usually marked on the nameplate in the engine compartment, and the time elapsed since then indicates the actual stocking period of the vehicle. 2. Precautions When Purchasing a Car: If the contract does not specify the manufacturing date of the car, it is not possible to claim rights under the contract law; conversely, if the contract stipulates that the car must be new, you can request the seller to replace it with a new one on the grounds of breach of contract.
120
Share

What to Do If the Car ETC Falls Off?

If the ETC falls off, it cannot be used anymore. You need to bring the original vehicle, the ETC device, and the bound bank card to the ETC device installation location to reactivate the device. The ETC installation process is as follows: After receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.
112
Share

What are the symptoms of a damaged pressure plate?

Clutch pressure plate damage can cause the clutch disc to slip. Here are the specific details about the automobile clutch and pressure plate: 1. If the clutch disc slips, the engine cannot transmit all its power to the wheels, resulting in insufficient power for the vehicle. Therefore, once the pressure plate is damaged, it must be replaced immediately; otherwise, it will affect the normal operation of the car. 2. The clutch is a crucial component in the automobile transmission system, installed between the engine and the gearbox. The clutch can connect or disconnect the engine and the gearbox. 3. The clutch pressure plate is fixed to the engine flywheel, with the clutch disc positioned between the pressure plate and the flywheel. The pressure plate has a diaphragm spring that presses the clutch disc tightly. Once the pressure plate is damaged, it cannot be repaired and must be replaced with a new one.
107
Share

How many liters of engine oil does the Audi Q5 2.0T require?

Audi Q5 2.0T requires 4.5L of engine oil. The Audi Q5 is a mid-size SUV model developed based on the production platform of the Audi A4. The stylish exterior of the Audi Q5 continues the design style of the Audi Q7, with Audi's signature chrome-plated "big face" highlighting its fashionable and dynamic design. The integrated headlights make it look more lively than the A4 model. Below is an introduction to the Audi Q5: The Audi Q5 features a fashionable and beautiful exterior with smooth lines; the interior is finely crafted; it is equipped with rich and practical features; the space is spacious and practical; and its power and handling performance are quite good. The Audi Q5 is powered by a 2.0TFSI four-cylinder in-line engine, paired with a 7-speed Stronic dual-clutch transmission, delivering ample power output, smooth gear shifting, and quick acceleration.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.