···
Log in / Register

Where to Add Windshield Washer Fluid for Geely Binyue?

6Answers
LeEliana
07/29/2025, 06:40:25 AM

Geely Binyue's windshield washer fluid is added to the filling port on the left side of the engine compartment. Windshield washer fluid, also known as windshield cleaning fluid, mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The Geely Binyue is a compact SUV. Taking the Binyue 2020 Manual Arrow model as an example, its body dimensions are: length 4330 mm, width 1800 mm, height 1609 mm, with a wheelbase of 2600 mm and a curb weight of 1310 kg. The Binyue 2020 Manual Arrow is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 104 kW at 5200 rpm and a maximum torque of 235 N·m between 1600 to 4000 rpm.

Was this review help?
111
Share
VonJosephine
08/13/2025, 11:27:20 AM

Last time I drove a Geely Binyue, I refilled the windshield washer fluid myself, and it was actually very simple. Open the engine hood, locate the small plastic reservoir near the cabin side with a windshield and water spray icon on its cap, usually in light blue or translucent color. Slowly unscrew the cap and pour in the washer fluid, making sure not to exceed the MAX mark on the reservoir. Use regular washer fluid in summer and switch to antifreeze type in winter—it’s cheap and available at any supermarket. Avoid overfilling to prevent leaks from sloshing while driving, and remember to tighten the cap and close the hood securely after refilling. Doing it yourself saves time waiting at the repair shop, takes just ten minutes, and feels quite rewarding.

Was this review help?
9
Share
Expand All
VanGavin
10/07/2025, 02:22:12 AM

I usually maintain my Bin Yue by myself, and adding windshield washer fluid is not complicated. First, open the hood and locate the washer fluid reservoir, typically found on either side of the engine compartment, marked by a blue cap with an identifier. Park on level ground and turn off the engine before operating, and using a funnel can prevent spills and make the process easier. Don’t cut corners by using tap water as windshield washer fluid—its impurities can clog the nozzles. Buying pre-mixed fluid is more convenient. After filling, take a moment to clean the spray nozzles to prevent clogging, ensuring clear visibility during rainy drives. Handling this small task yourself is much quicker than visiting a repair shop, and even female car owners can manage it effortlessly.

Was this review help?
12
Share
Expand All
McWalter
11/20/2025, 02:45:29 AM

Adding windshield washer fluid to the Bin Yue is very simple. First, exit the car and pull the hood release lever to access the engine compartment. Look for a plastic reservoir marked with a windshield wiper symbol. Unscrew the cap, fill it to the top with fluid, then tighten the cap securely. A reminder: avoid overfilling to prevent spillage, and pay attention to the fluid type based on seasonal changes. If there are any issues when spraying, just check the hoses and nozzles.

Was this review help?
4
Share
Expand All
Grant
01/10/2026, 09:33:40 PM

As a seasoned driver with three years of experience driving the Bin Yue, I always top up the windshield washer fluid myself. The reservoir is a clearly marked plastic tank located at the front of the engine compartment. Two key points to note: First, only refill when the engine is cold to avoid burns. Second, never use tap water as it can freeze in winter and damage the nozzles. After refilling, test the spray to ensure the system is functioning properly. This simple maintenance routine extends wiper lifespan and saves significant money.

Was this review help?
19
Share
Expand All
NolanRose
04/07/2026, 02:00:49 AM

The design of the Binyue is quite user-friendly. The windshield washer fluid reservoir is easy to locate in the engine compartment—it's the transparent container with a water spray icon. When refilling, open the hood and pour the fluid directly into the opening, ensuring the liquid level does not exceed the maximum mark. By the way, this car is equipped with a sensor; the dashboard will alert you when the fluid is running low, so don't ignore it. Always choose reputable brands of windshield washer fluid to avoid nozzle clogging and ensure cleaning efficiency—safety comes first.

Was this review help?
8
Share
Expand All
More Q&A

How much coolant is needed for a Mercedes GLK?

The Mercedes GLK requires approximately 6 liters of coolant for a full replacement. Coolant is a special additive-containing fluid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and year-round protection against scale and corrosion. Can different coolants be mixed?: It is necessary to use the same brand of coolant. Different brands may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. How to determine if coolant is low: Observe the coolant warning light on the dashboard. If it illuminates, it may indicate low coolant levels, though it could also be due to excessively high engine temperatures. Check the coolant reservoir. If the level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Inspect the water level scale markings on the coolant tank. The normal coolant level should be between the maximum and minimum marks. If it falls below the minimum, it indicates a coolant deficiency.
106
Share

What to Do If Car Key Falls into Toilet Hole?

You can go to a 4S shop to have the key re-matched. The first step when a remote key falls into water is to remove the key battery, then use compressed air to dry the interior. Of course, most people don't have compressed air on hand, so a hair dryer can be used instead. First, use cold air for 1 minute to blow out the water inside. After completing the above steps, the next thing to do is to wrap the key with a pile of desiccants similar to those found in food packaging, allowing them to absorb the remaining moisture in the key. Placing the key in a bowl of rice, although many say rice's moisture absorption isn't great, this method has saved many people's keys.
101
Share

What is the speed limit removal for Haojue DK150?

Haojue DK150's speed limit removal is 100 kilometers per hour. Introduction to Haojue DR160: The Haojue DR160 is a relatively good small-displacement sports street bike. This bike has sufficient power, flexible handling, rich configurations, and meticulous craftsmanship, making it a dark horse model among independent brands. Haojue DR160's Engine: The Haojue DR160 is equipped with Haojue's TSR single-cylinder air-cooled engine. This engine has a compression ratio of 9.65:1, an actual displacement of 162ml, a maximum power of 11KW, and a maximum torque of 14N.m, paired with an electronic fuel injection system. This engine is a typical expanded and upgraded engine, so the valve train still uses a single overhead camshaft and a two-valve design, with a relatively low compression ratio.
119
Share

How to Activate the Lock Beep for Lexus?

Lexus vehicles emit a beep sound when locked. Here is some related information about Lexus: 1. The Lexus logo features the uppercase letter 'L' from the name 'Lexus', enclosed within an oval. The oval symbolizes the globe, representing the worldwide presence of Lexus vehicles. 2. Taking the Lexus LM as an example, it boasts the largest spindle grille in the Lexus lineup, with chrome accents introduced for the first time. The signature L-shaped matrix LED headlights enhance visibility, while the sleek B-pillar design with dual-arrow accents achieves aesthetic balance. Combined with the full-width LED taillights, the Lexus LM exudes a sense of luxury.
115
Share

Should You Release the Handbrake or Shift Gear First When Driving?

The correct starting posture should be to shift gear first, then release the handbrake. Here are the relevant explanations: 1. As a beginner, the reason for shifting gear before releasing the handbrake when starting is mainly for safety considerations. Because when starting on a slope, releasing the handbrake first will put the car in a neutral coasting state, causing the vehicle to slide in the direction of the slope without any braking, which can easily lead to safety accidents. 2. However, if you shift gear first and then release the handbrake, the car will receive a force from the engine idle when in first gear. This force can prevent the vehicle from rolling backward in neutral, effectively avoiding potential dangers. 3. Therefore, the correct starting posture for a manual transmission should be: press the clutch, press the brake, shift gear, release the handbrake, release the brake, lift the clutch, and start moving.
109
Share

What are the classic quotes of Cadillac?

The following are the classic quotes of Cadillac: 1. All greatness begins with a brave start: The history of Cadillac represents the history of American luxury cars. In Webster's Dictionary, Cadillac is defined as a synonym for 'the most outstanding and prestigious thing of its kind'; it has been awarded the honor of 'World Standard' by the London Royal Automobile Club, which is renowned for pursuing ultimate luxury. 2. Dare to be the first in the world: Cadillac's brand slogan in China was once 'Dare to be the first in the world.' In early 2008, Cadillac changed its brand slogan from 'Dare to be the first in the world' to 'Belief? Creation? Ownership,' emphasizing the achievement of desired goals through inner strength. For over a hundred years, Cadillac has created countless firsts in the industry and established numerous standards for luxury cars.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.