Where Should the Probationary Driver Sign Be Placed on the Car?

[Edgar]

The probationary driver sign should be placed on the rear of the vehicle. New drivers can obtain a free probationary driver sign from the traffic police department and must affix or hang it as required. New drivers can collect the probationary driver sign with their driver's license at the traffic violation handling windows of the traffic police brigades in various jurisdictions or at the vehicle management offices. More information about the probationary driver sign is as follows: 1. The probationary driver sign is a marker to alert others that a new driver is on the road. The primary color of the sign is yellow, with orange-red as the secondary color. 2. According to Article 64, Paragraph 3 of Order No. 123: When driving a motor vehicle during the probationary period, a uniform-style probationary driver sign must be affixed or hung on the rear of the vehicle. 3. The traffic police remind that if a probationary driver does not affix or hang the uniform sign on the rear of the vehicle; if the affixed or hung sign cannot be normally recognized; or if the affixed or hung sign does not meet the requirements, such as signs like 'New Driver on the Road' or self-printed signs, it will be considered as not having the sign affixed.

[McLeah]

As a novice driver, I have deep feelings about sticking the practice sign. My instructor repeatedly emphasized that placement is key. The lower left corner inside the rear windshield is my top choice—it won't get scratched by wipers and is clearly visible to cars behind. Once, I saw a friend stick it on the outside bumper, but it got washed off twice during car washes, forcing him to buy new ones. Avoid the rearview mirror's line of sight at all costs. I once saw a news story about a new driver who placed it right in the middle, blocking their view of electric scooters while reversing. Actually, there's no need to stick it on the front windshield—regulations only require it on the rear. Static cling stickers are the most convenient, leaving no marks when repositioned and causing no damage to the paint.

[DaisyLynn]

Before taking the driving test (Subject 3), I specifically researched the regulations for probationary driver signs. The key points are not to obstruct the view or license plate. It's recommended to place it at the lower right corner of the rear windshield, which is more dirt-resistant than sticking it on the exterior. A friend used a magnetic sign on the trunk, but that only works with metallic paint. Remember to check the sign's reflectivity – it allows trailing cars to spot you 20 meters earlier at night. A common mistake beginners make is placing it too high, blocking the interior rearview mirror, which is more dangerous than not having a sign at all. The middle of the trunk isn't ideal either, as the sign becomes ineffective when the trunk is opened. Static cling signs are cost-effective, with a set available at supermarkets for just a few dollars.

[OLondon]

Recently, while helping my cousin place her internship sticker, I noticed some key points are easily overlooked. The lower left and right corners of the rear windshield are ideal locations, avoiding the wiper range. Never use double-sided tape directly on the glass - scrapers will leave scratches during removal. Once saw an owner stick it on the antenna position, causing terrible wind noise. Absolutely avoid placing near front fog lights, as mechanics need to remove the lamp housing during repairs. Practical tests show the lower left corner provides the most visible angle for truck drivers behind. Remember to use compliant reflective materials - those cartoon stickers from Taobao may incur fines if spotted by traffic police. Best to place in two locations: rear window plus the exterior of the trunk for double warning and peace of mind.

[JuniperLynn]

Just mentioned this while instructing a trainee driver - the placement of probationary plates must balance practicality with regulations. The lower right corner of the rear windshield is my preferred option, as it doesn't obstruct the three-point rear visibility. Don't follow my neighbor's example of sticking it on the C-pillar - you can't see anything when turning. Adhesive quality matters greatly; low-quality glue can melt on hot days and stain the glass. Some owners place it beside the rear emblem, only to have both removed during emblem cleaning. I recommend new drivers conduct a test before hitting the road: sit in the driver's seat while a friend holds and moves the plate to find the optimal position before affixing. Check weekly for edge lifting, as high-speed driving might cause it to be blown off by airflow.

[OLevi]

Veteran drivers remind that novice stickers affect safety details. The best adhesion is at the lower left corner of the rear window, more secure than on external metal surfaces. Magnetic types can be used on metallic paint, but they rattle on bumpy roads. Once during repairs, I saw a sticker placed near the trunk latch—it wore out after a hundred openings. Avoid areas near the license plate frame to prevent being penalized for obscured plates. Check immediately after car washes as high-pressure hoses can loosen edges. Avoid strong adhesives on plastic shells as they leave stubborn yellow stains after sun exposure. Keep a spare in the glove box, as humidity during rainy seasons can weaken adhesive.